Proceedings of the 5th International Conference on Advanced Design and Manufacturing Engineering

Making of Free Cutting Austenitic Stainless Steels with Additions of Sulfur, Rare Earth and Bismuth

Authors
Zhiyuan Wang, Zhenyao Shao, Zhuang Li, Hongliang Zhang, Jijie Wang, Hecheng Zhang, Jingyun Yuan
Corresponding Author
Zhiyuan Wang
Available Online October 2015.
DOI
10.2991/icadme-15.2015.356How to use a DOI?
Keywords
austenitic stainless steel; machinability; sulfur; rare earth; bismuth.
Abstract

Making of free cutting austenitic stainless steels with additions of sulfur, rare earth and bismuth were investigated through comparing to the metallurgical properties and machinabilitys. The results have shown that free-machining additives exhibit the characteristic shape of spindle shaped sulphides and rounded, globular shaped inclusions. The cutting forces of free cutting austenitic stainless steel were lower than those of an austenite stainless steel 1Cr-18Ni-9Ti at three cutting speeds. The machinability of austenitic stainless steel was visibly improved by adding free-cutting additives, such as sulfur, rare earth and bismuth.

Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 5th International Conference on Advanced Design and Manufacturing Engineering
Series
Advances in Engineering Research
Publication Date
October 2015
ISBN
978-94-6252-113-1
ISSN
2352-5401
DOI
10.2991/icadme-15.2015.356How to use a DOI?
Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Zhiyuan Wang
AU  - Zhenyao Shao
AU  - Zhuang Li
AU  - Hongliang Zhang
AU  - Jijie Wang
AU  - Hecheng Zhang
AU  - Jingyun Yuan
PY  - 2015/10
DA  - 2015/10
TI  - Making of Free Cutting Austenitic Stainless Steels with Additions of Sulfur, Rare Earth and Bismuth
BT  - Proceedings of the 5th International Conference on Advanced Design and Manufacturing Engineering
PB  - Atlantis Press
SP  - 1928
EP  - 1932
SN  - 2352-5401
UR  - https://doi.org/10.2991/icadme-15.2015.356
DO  - 10.2991/icadme-15.2015.356
ID  - Wang2015/10
ER  -