Research on Fatigue Fracture Characterization of PC/ABS Blend
- 10.2991/icadme-15.2015.351How to use a DOI?
- Compact tension specimen, PC/ABS, Blend, Injection Molding conditions, da/dn.
PC/ABS blend is widely used in the vehicle interior, electronic parts and accessories. In this dissertation, fracture crack properties of PC/ABS blend was studied. The specimens were prepared under various injections molding conditions, such as filling time, melting temperature and mold temperature. The fracture mechanisms were examined with a scanning electron microscopy. The injection molding condition of filling time 2 seconds, melting temperature 260°C and mold temperature 55°C had the slowest fracture crack propagation speed. The da/dN with K curves were linear regression to find out Paris’s equation coefficients. The fracture mechanisms were the crack surface edge fiber pulled off, pushing back and ribbed surface rendering stripes
- © 2015, the Authors. Published by Atlantis Press.
- Open Access
- This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).
Cite this article
TY - CONF AU - Ming-Hsiung Ho AU - Pin-Ning Wang AU - Jung-Peng Ye AU - Sheng-Jie Li PY - 2015/10 DA - 2015/10 TI - Research on Fatigue Fracture Characterization of PC/ABS Blend BT - Proceedings of the 5th International Conference on Advanced Design and Manufacturing Engineering PB - Atlantis Press SP - 1899 EP - 1902 SN - 2352-5401 UR - https://doi.org/10.2991/icadme-15.2015.351 DO - 10.2991/icadme-15.2015.351 ID - Ho2015/10 ER -