Proceedings of the 5th International Conference on Advanced Design and Manufacturing Engineering

Influence of the Strength of the Filling Body on the Surface Subsidence and Deformation

Authors
Pengfei Yang, Yukai Wang, Xiangxiang Yang
Corresponding Author
Pengfei Yang
Available Online October 2015.
DOI
10.2991/icadme-15.2015.314How to use a DOI?
Keywords
strength of filling body; numerical simulation; vertical stress; vertical displacement; horizontal displacement
Abstract

In order to research the Influence of the strength of the filling body on the surface subsidence and deformation, with the 10203 working face of Xinyang Mine as the background, based on the numerical simulation software of FLAC3D, when the filling rate was 90%, the Influence of the strength of the filling body on the surface subsidence and deformation was researched under conditions of different strength of filling body(the strength of the filling body was 0.05, 0.1, 0.15, 0.2, 0.3, 0.4 times of the coal body). Research has shown that with the increase of the strength of the filling body, the vertical stress of the roadway roof increased; the maximum vertical displacement and horizontal displacement decreased. When the strength of the filling body was more than0.2 times of the coal body, the Influence of the strength of the filling body on the surface subsidence and deformation was stabilizing. At this time, the vertical stress of the roadway roof was 0.3615MPa; the maximum vertical displacement was 68mm, the maximum horizontal displacement was 8.5mm; which meet the requirement of the national protection of first class.

Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 5th International Conference on Advanced Design and Manufacturing Engineering
Series
Advances in Engineering Research
Publication Date
October 2015
ISBN
978-94-6252-113-1
ISSN
2352-5401
DOI
10.2991/icadme-15.2015.314How to use a DOI?
Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Pengfei Yang
AU  - Yukai Wang
AU  - Xiangxiang Yang
PY  - 2015/10
DA  - 2015/10
TI  - Influence of the Strength of the Filling Body on the Surface Subsidence and Deformation
BT  - Proceedings of the 5th International Conference on Advanced Design and Manufacturing Engineering
PB  - Atlantis Press
SP  - 1696
EP  - 1702
SN  - 2352-5401
UR  - https://doi.org/10.2991/icadme-15.2015.314
DO  - 10.2991/icadme-15.2015.314
ID  - Yang2015/10
ER  -