Proceedings of the 5th International Conference on Advanced Design and Manufacturing Engineering

Torque Ripple Improvement by Injecting High Voltage Pulses

Authors
Yang Li, Ming Feng
Corresponding Author
Yang Li
Available Online October 2015.
DOI
10.2991/icadme-15.2015.269How to use a DOI?
Keywords
Torque ripple. Current rising-edge time. Leakage inductance. BLDC motor.
Abstract

This paper presents a new method of injection of high voltage pulses (IHVP) during commutation in order to shorten current’s rising-edge time and reduce the torque ripple. A quantitative method for choosing the voltage magnitude and the pulse width is put forward with trapezoidal back EMF under square voltage wave condition. Its optimal discrete solutions and the principle of choosing the discrete pulse coefficient under PWM control are derived. Finally, the effect of the method is verified by experiments.

Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 5th International Conference on Advanced Design and Manufacturing Engineering
Series
Advances in Engineering Research
Publication Date
October 2015
ISBN
978-94-6252-113-1
ISSN
2352-5401
DOI
10.2991/icadme-15.2015.269How to use a DOI?
Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Yang Li
AU  - Ming Feng
PY  - 2015/10
DA  - 2015/10
TI  - Torque Ripple Improvement by Injecting High Voltage Pulses
BT  - Proceedings of the 5th International Conference on Advanced Design and Manufacturing Engineering
PB  - Atlantis Press
SP  - 1452
EP  - 1456
SN  - 2352-5401
UR  - https://doi.org/10.2991/icadme-15.2015.269
DO  - 10.2991/icadme-15.2015.269
ID  - Li2015/10
ER  -