Proceedings of the 5th International Conference on Advanced Design and Manufacturing Engineering

Experimental research on heat transfer characteristics of Dimple plate heat exchanger

Authors
Changfa Ji, Liangliang Wu, Jiawei Li, Xiaoxia Wang
Corresponding Author
Changfa Ji
Available Online October 2015.
DOI
10.2991/icadme-15.2015.184How to use a DOI?
Keywords
Heat exchanger; Dimple plate; Heat transfer characteristics; Flow resistance.
Abstract

In this paper, we use experiment to work on our own design of the dimple plate heat exchanger and the experimental result is compared with the heat transfer characteristics of the flat plate under the same experimental conditions.The test result shows that, under the given inlet temperature condition, heat transfer is closely related to Reynolds. At the low Reynolds number, the intensive heat transfer effect of dimple plate is not obvious. With the increase of Reynolds number, dimple plate’s wall heat transfer coefficient and heat transfer increase gradually, water outlet temperature gradually decrease, the flow resistance will also increase at the same time.The dimple plate has the effect of strengthening heat transfer, but also increases the resistance, in practical application process required to optimize the analysis, to find out a dimple plate with good matching effect between heat transfer enhancement and pressure loss.

Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 5th International Conference on Advanced Design and Manufacturing Engineering
Series
Advances in Engineering Research
Publication Date
October 2015
ISBN
978-94-6252-113-1
ISSN
2352-5401
DOI
10.2991/icadme-15.2015.184How to use a DOI?
Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Changfa Ji
AU  - Liangliang Wu
AU  - Jiawei Li
AU  - Xiaoxia Wang
PY  - 2015/10
DA  - 2015/10
TI  - Experimental research on heat transfer characteristics of Dimple plate heat exchanger
BT  - Proceedings of the 5th International Conference on Advanced Design and Manufacturing Engineering
PB  - Atlantis Press
SP  - 979
EP  - 983
SN  - 2352-5401
UR  - https://doi.org/10.2991/icadme-15.2015.184
DO  - 10.2991/icadme-15.2015.184
ID  - Ji2015/10
ER  -