Microstructure and mechanical property of resistance spot welded joint between pure titanium and stainless steel with interlayer of Nb
- 10.2991/icadme-15.2015.153How to use a DOI?
- Titanium, Stainless steel, Interlayer, Resistance Spot Welding
Commercially pure titanium and stainless steel sheets were welded using resistance spot welding with interlayer of Nb. The interfacial microstructure was observed, the effects of welding current on nugget diameter and tensile shear load were investigated deeply. The results show that the interfacial reaction products were consisted of Nb and FeNb eutectic structure. The joint with the maximum tensile shear load of 5.61kN was obtained at the condition of 10 kA. It reveals that it is effective to weld titanium and stainless steel using resistance spot welding with an interlayer of Nb.
- © 2015, the Authors. Published by Atlantis Press.
- Open Access
- This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).
Cite this article
TY - CONF AU - Longlong Hou AU - Ranfeng Qiu AU - Lihu Cui AU - Zhongbao Shen AU - Qingzhe Li PY - 2015/10 DA - 2015/10 TI - Microstructure and mechanical property of resistance spot welded joint between pure titanium and stainless steel with interlayer of Nb BT - Proceedings of the 5th International Conference on Advanced Design and Manufacturing Engineering PB - Atlantis Press SP - 782 EP - 787 SN - 2352-5401 UR - https://doi.org/10.2991/icadme-15.2015.153 DO - 10.2991/icadme-15.2015.153 ID - Hou2015/10 ER -