Proceedings of the 3rd International Conference on Material, Mechanical and Manufacturing Engineering

Design and Application of Vibrator Drived by Piezoelectric Stack Based on Low Frequency Vibration Cutting

Authors
Fanxia Kong
Corresponding Author
Fanxia Kong
Available Online August 2015.
DOI
10.2991/ic3me-15.2015.421How to use a DOI?
Keywords
Low-frequency vibration cutting; high-rigidity; piezoceramics; superalloys
Abstract

A new vibration cutting device was presented in the paper to offer much high power and high rigidity for the unstable vibration parameters, bad compliance between practical and theory which produced while using conventional vibration cutting equipment. Detailed calculation and structure design were carried out with special structure axis driven by piezoelectric stack which ensure output of amplitude to the real state. Confirmatory experiments were done and the experiment results showed that the new device achieves the true amplitude and the actual cutting performance which well matches the theoretical effect. This study provides a reliable basis for vibration cutting theory, experimental research and production.

Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 3rd International Conference on Material, Mechanical and Manufacturing Engineering
Series
Advances in Engineering Research
Publication Date
August 2015
ISBN
10.2991/ic3me-15.2015.421
ISSN
2352-5401
DOI
10.2991/ic3me-15.2015.421How to use a DOI?
Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Fanxia Kong
PY  - 2015/08
DA  - 2015/08
TI  - Design and Application of Vibrator Drived by Piezoelectric Stack Based on Low Frequency Vibration Cutting
BT  - Proceedings of the 3rd International Conference on Material, Mechanical and Manufacturing Engineering
PB  - Atlantis Press
SP  - 2196
EP  - 2200
SN  - 2352-5401
UR  - https://doi.org/10.2991/ic3me-15.2015.421
DO  - 10.2991/ic3me-15.2015.421
ID  - Kong2015/08
ER  -