Proceedings of the 3rd International Conference on Material, Mechanical and Manufacturing Engineering

A Comparative Study of Fish-scaling Resistance of Low Carbon Non-microalloyed and Boron-microalloyed Steels for Enameling

Authors
Zaiwang Liu, Zhimin Zhang, Lele Dai, Xiaojing Shao, Hao Zhang, Yongqiang Xue
Corresponding Author
Zaiwang Liu
Available Online August 2015.
DOI
10.2991/ic3me-15.2015.414How to use a DOI?
Keywords
boron-microalloyed steel, cementite, fish-scaling resistance, TH value
Abstract

TH values of low carbon non-microalloyed and boron-microalloyed steels before and after baking were measured and microstructures of low carbon non-microalloyed and boron-microalloyed steels before and after baking were observed by scanning electron microscope as well as transmission electron microscope in order to study fish-scaling resistance of steels for enameling. Results show that cementite is the important hydrogen storage trap in low carbon steels and cementite at ferrite grain boundary is the most important hydrogen storage trap. TH value of non-microalloyed steels before baking is highest because all cementites distribute along ferrite grain boundaries. TH value of non-microalloyed steels after baking decreases due to a decrease in cementite-ferrite interfaces when cementites grow up. TH value of boron-microalloyed steels before baking is lowest because most cementites disperse in ferrite grains. TH value of boron-microalloyed steels after baking increases because cementites in ferrite grains are pushed to ferrite grain boundaries by migratory grain boundaries when ferrite grains grow up.

Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 3rd International Conference on Material, Mechanical and Manufacturing Engineering
Series
Advances in Engineering Research
Publication Date
August 2015
ISBN
978-94-6252-100-1
ISSN
2352-5401
DOI
10.2991/ic3me-15.2015.414How to use a DOI?
Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Zaiwang Liu
AU  - Zhimin Zhang
AU  - Lele Dai
AU  - Xiaojing Shao
AU  - Hao Zhang
AU  - Yongqiang Xue
PY  - 2015/08
DA  - 2015/08
TI  - A Comparative Study of Fish-scaling Resistance of Low Carbon Non-microalloyed and Boron-microalloyed Steels for Enameling
BT  - Proceedings of the 3rd International Conference on Material, Mechanical and Manufacturing Engineering
PB  - Atlantis Press
SP  - 2161
EP  - 2165
SN  - 2352-5401
UR  - https://doi.org/10.2991/ic3me-15.2015.414
DO  - 10.2991/ic3me-15.2015.414
ID  - Liu2015/08
ER  -