Proceedings of the 3rd International Conference on Material, Mechanical and Manufacturing Engineering

Hardware-configuration based on FPGA for open CNC system

Authors
Shuanqiang Yang, Xinlong Huang
Corresponding Author
Shuanqiang Yang
Available Online August 2015.
DOI
10.2991/ic3me-15.2015.326How to use a DOI?
Keywords
Open CNC system, FPGA, Hardware-configuration
Abstract

In this paper, according to analyzing the domestic and foreign recent research status and future developments of open architecture CNC system, an open soft system with configurable architecture based on PC + programmable I/O interface card has been studied. The research is studied for the drawbacks of existing open CNC system based on PC and the unresolved problems of preliminary study presented by the research group, to satisfy the development requirements of low cost, high performance that means high speed, high precision and the large amount of data processing, configurable architecture and modularization. Meanwhile, this dissertation makes systematic and deep going study on function requirements, structure planning based on programmable I/O interface card, hardware-configurable modeling, circuits design of control chip, task assigning between software and hardware and servo control.

Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 3rd International Conference on Material, Mechanical and Manufacturing Engineering
Series
Advances in Engineering Research
Publication Date
August 2015
ISBN
10.2991/ic3me-15.2015.326
ISSN
2352-5401
DOI
10.2991/ic3me-15.2015.326How to use a DOI?
Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Shuanqiang Yang
AU  - Xinlong Huang
PY  - 2015/08
DA  - 2015/08
TI  - Hardware-configuration based on FPGA for open CNC system
BT  - Proceedings of the 3rd International Conference on Material, Mechanical and Manufacturing Engineering
PB  - Atlantis Press
SP  - 1690
EP  - 1695
SN  - 2352-5401
UR  - https://doi.org/10.2991/ic3me-15.2015.326
DO  - 10.2991/ic3me-15.2015.326
ID  - Yang2015/08
ER  -