Proceedings of the 3rd International Conference on Material, Mechanical and Manufacturing Engineering

Contact Stress Analysis of Tapered Interference Fit for the Cantilevered Axle

Authors
Shufen Xiao, Xueqi Jiang, Xiwen Li
Corresponding Author
Shufen Xiao
Available Online August 2015.
DOI
10.2991/ic3me-15.2015.325How to use a DOI?
Keywords
Contact stress; Tapered interference fit; Equivalent stress; FEM method
Abstract

By means of mechanic analysis, the contact stress analysis along the axial direction of the tapered interference fit was conducted, and it was compared with the FEM analysis of 3 modes of different load, namely, displacement load, pressure load, and offset load. Results shows that: the position of maximum contact stress of the tapered interference fit is at large end of the interference fit; the value of the middle section from calculation coincides well with the values from FEM method; and for the equivalent stress analysis, the values of the middle section of the 3 modes of load coincides well.

Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 3rd International Conference on Material, Mechanical and Manufacturing Engineering
Series
Advances in Engineering Research
Publication Date
August 2015
ISBN
978-94-6252-100-1
ISSN
2352-5401
DOI
10.2991/ic3me-15.2015.325How to use a DOI?
Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Shufen Xiao
AU  - Xueqi Jiang
AU  - Xiwen Li
PY  - 2015/08
DA  - 2015/08
TI  - Contact Stress Analysis of Tapered Interference Fit for the Cantilevered Axle
BT  - Proceedings of the 3rd International Conference on Material, Mechanical and Manufacturing Engineering
PB  - Atlantis Press
SP  - 1685
EP  - 1689
SN  - 2352-5401
UR  - https://doi.org/10.2991/ic3me-15.2015.325
DO  - 10.2991/ic3me-15.2015.325
ID  - Xiao2015/08
ER  -