Proceedings of the 3rd International Conference on Material, Mechanical and Manufacturing Engineering

Determination flavomycin residue in grass carp by high performance liquid chromatography

Authors
Liang-Liang Tian, Dong-Mei Huang, Yong-Fu Shi, Feng Han, Peng Zhou
Corresponding Author
Liang-Liang Tian
Available Online August 2015.
DOI
10.2991/ic3me-15.2015.91How to use a DOI?
Keywords
High performance liquid chromatography; grass carp;flavomycin; residues;
Abstract

A method for the determination of flavomycin in shrimp by high performance liquid chromatography was established. Flavomycin in sample was extracted by methanol solution and defatted with n-hexane. The lower was cleaned through the membrane and determined by HPLC. The calibration curve was linear. The method was accurate and reproducible, being successfully applied to the monitoring of flavomycin in grass carp. The recoveries were 83.9 %-88.2 % in the spiked range of 2.0-50.0 mg/kg in grass carp. The relative standard deviation was below 10.4%. The limit of detection for this method as defined by ten times signal to noise was 2.0mg/kg.

Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 3rd International Conference on Material, Mechanical and Manufacturing Engineering
Series
Advances in Engineering Research
Publication Date
August 2015
ISBN
10.2991/ic3me-15.2015.91
ISSN
2352-5401
DOI
10.2991/ic3me-15.2015.91How to use a DOI?
Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Liang-Liang Tian
AU  - Dong-Mei Huang
AU  - Yong-Fu Shi
AU  - Feng Han
AU  - Peng Zhou
PY  - 2015/08
DA  - 2015/08
TI  - Determination flavomycin residue in grass carp by high performance liquid chromatography
BT  - Proceedings of the 3rd International Conference on Material, Mechanical and Manufacturing Engineering
PB  - Atlantis Press
SP  - 462
EP  - 465
SN  - 2352-5401
UR  - https://doi.org/10.2991/ic3me-15.2015.91
DO  - 10.2991/ic3me-15.2015.91
ID  - Tian2015/08
ER  -