Proceedings of the 2017 5th International Conference on Frontiers of Manufacturing Science and Measuring Technology (FMSMT 2017)

Hardware Design of Image Processing System based on EMCCD

Authors
Wenke He, Xuwen Li, Qiang Wu
Corresponding Author
Wenke He
Available Online April 2017.
DOI
10.2991/fmsmt-17.2017.300How to use a DOI?
Keywords
EMCCD; CCD201; Image Processing System; Output Ripple.
Abstract

Electron Multiplying Charge Coupled Device (EMCCD) is a kind of high sensitive imaging device, widely used in shimmer detection field. The paper proposed a design of image processing system for CCD201, an EMCCD with high frequency and high sensitivity of E2V Corporation. We selected the Xilinx product ZYNQ-7000 series, based on ARM+FPGA architecture, as the processor. According to the amount of image data and the complexity of image processing, the specific model was determined as ZYNQ-7030. We designed a set of memory system out of chip and communication interface for the processor. To improve power conversion efficiency and minimize the system, a 4-channel DCDC micro-module LTM4644 was selected. LTM4644 has lower output voltage ripple than common DCDC part and can meet the power noise request of the system.

Copyright
© 2017, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2017 5th International Conference on Frontiers of Manufacturing Science and Measuring Technology (FMSMT 2017)
Series
Advances in Engineering Research
Publication Date
April 2017
ISBN
978-94-6252-331-9
ISSN
2352-5401
DOI
10.2991/fmsmt-17.2017.300How to use a DOI?
Copyright
© 2017, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Wenke He
AU  - Xuwen Li
AU  - Qiang Wu
PY  - 2017/04
DA  - 2017/04
TI  - Hardware Design of Image Processing System based on EMCCD
BT  - Proceedings of the 2017 5th International Conference on Frontiers of Manufacturing Science and Measuring Technology (FMSMT 2017)
PB  - Atlantis Press
SP  - 1544
EP  - 1549
SN  - 2352-5401
UR  - https://doi.org/10.2991/fmsmt-17.2017.300
DO  - 10.2991/fmsmt-17.2017.300
ID  - He2017/04
ER  -