Proceedings of the 2nd International Conference on Electronic & Mechanical Engineering and Information Technology (EMEIT 2012)

<Previous Article In Volume
Next Article In Volume>

Kinematic calculation analysis of micro injection molding machine with double-toggle clamping mechanism based on MATLAB

Authors
Xiaowei Li, Zhiming Jin, Yajun Zhang, Jian Zhuang, Gang Zhou
Corresponding Author
Xiaowei Li
Available Online September 2012.
DOI
10.2991/emeit.2012.387How to use a DOI?
Keywords
Micros Injection Molding, Double-toggle Clamping Mechanism, kinematical Calculation
Abstract

The geometric model of micro injection molding machine with double-toggle clamping mechanism is established to analyses the kinematic and mechanical performance of double-toggle clamping mechanism. The kinematic analysis of the double-toggle clamping mechanism is used to study the effects of the double-toggle parameters for the microstructure injection molding machine. The parameters discussed in this paper include the amplification ratio, velocity ratio and the amplified force ratio for the double-toggle clamping mechanism. The optimized parameters of clamping mechanism are obtained according the calculation results of stroke ratio, velocity ratio and the amplified force ratio.

Copyright
© 2012, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

<Previous Article In Volume
Next Article In Volume>
Volume Title
Proceedings of the 2nd International Conference on Electronic & Mechanical Engineering and Information Technology (EMEIT 2012)
Series
Advances in Intelligent Systems Research
Publication Date
September 2012
ISBN
10.2991/emeit.2012.387
ISSN
1951-6851
DOI
10.2991/emeit.2012.387How to use a DOI?
Copyright
© 2012, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

risenwbib
TY  - CONF
AU  - Xiaowei Li
AU  - Zhiming Jin
AU  - Yajun Zhang
AU  - Jian Zhuang
AU  - Gang Zhou
PY  - 2012/09
DA  - 2012/09
TI  - Kinematic calculation analysis of micro injection molding machine with double-toggle clamping mechanism based on MATLAB
BT  - Proceedings of the 2nd International Conference on Electronic & Mechanical Engineering and Information Technology (EMEIT 2012)
PB  - Atlantis Press
SP  - 1746
EP  - 1750
SN  - 1951-6851
UR  - https://doi.org/10.2991/emeit.2012.387
DO  - 10.2991/emeit.2012.387
ID  - Li2012/09
ER  -