Proceedings of the 2018 3rd International Conference on Electrical, Automation and Mechanical Engineering (EAME 2018)

Secondary Information Fault-tolerance Method for Smart Substation Based on Residuals of Measurement Equations

Authors
Yutao Qiu, Yimin Ding, Wulue Pan, Chaoli Feng
Corresponding Author
Yutao Qiu
Available Online June 2018.
DOI
10.2991/eame-18.2018.4How to use a DOI?
Keywords
smart substation; state estimation; residual identifi-cation; bad data distinguishing; information fault-tolerance
Abstract

This paper presented a method of fault-tolerance for secondary-system information in smart substations. It was to solve the problem of information redundancy. This article drew on a method of state estimation on the primary-system and used the calculation of measurement-equation residuals to identify and eliminate bad data to complete the information fault-tolerance function. The diagrams illustrated the process of information interaction in the secondary-system, and introduced the configuration mode of relay protection in smart substations. Through simulation and verification, using the method of residual identification to perform protection fault-tolerance can effectively prevent the protection against misoperation caused by bad data, improve the credibility of data, and promote the reliability of the protection.

Copyright
© 2018, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2018 3rd International Conference on Electrical, Automation and Mechanical Engineering (EAME 2018)
Series
Advances in Engineering Research
Publication Date
June 2018
ISBN
978-94-6252-538-2
ISSN
2352-5401
DOI
10.2991/eame-18.2018.4How to use a DOI?
Copyright
© 2018, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Yutao Qiu
AU  - Yimin Ding
AU  - Wulue Pan
AU  - Chaoli Feng
PY  - 2018/06
DA  - 2018/06
TI  - Secondary Information Fault-tolerance Method for Smart Substation Based on Residuals of Measurement Equations
BT  - Proceedings of the 2018 3rd International Conference on Electrical, Automation and Mechanical Engineering (EAME 2018)
PB  - Atlantis Press
SP  - 16
EP  - 20
SN  - 2352-5401
UR  - https://doi.org/10.2991/eame-18.2018.4
DO  - 10.2991/eame-18.2018.4
ID  - Qiu2018/06
ER  -