Proceedings of the International Conference "Aviamechanical engineering and transport" (AVENT 2018)

сalculated model of wedge-shaped sliding supports taking into account rheological properties of viscoelastic lubricant

Authors
Kamil Samedovich Akhverdiev, Elena Olegovna Lagunova, Murman Alexsandrovich Mukutadze
Corresponding Author
Kamil Samedovich Akhverdiev
Available Online May 2018.
DOI
10.2991/avent-18.2018.47How to use a DOI?
Keywords
wedge slide support (slider, guide); dependence of viscosity of lubricant on temperature; energy dissipation rate; molten guide surface; viscoelastic lubricant
Abstract

The paper presents a method for the formation of an exact self-similar solution of the hydrodynamic calculation of a wedge-shaped support (slider, guide) operating on viscoelastic liquid lubricant caused by the melt of the guide, taking into account the dependence of viscosity and shear modulus on temperature. The solution of the problem has been found on the basis of a system of equations describing the motion of an incompressible liquid viscoelastic lubricant for the case of a "thin layer", taking into account the dependence of the viscosity of the liquid lubricant and the shear modulus on temperature, the continuity equation and the expression for the dissipation rate of mechanical energy for determining the function due to the melt of the guide surface coated with a melt of a low-melting coating. Asymptotic solution of a system of differential equations with allowance for the boundary conditions on the surface of the guide, slider and contour is found in the form of series in powers of the small parameter K, caused by the melt and the rate of dissipation of mechanical energy. In order to determine the velocity and pressure fields in the lubricating and molten layer, there is an exact self-similar solution for the zero and first approximations. As a result of finding the exact self-similar solution, the value of the function, caused by the melt of the guide (parameter M, characterizing the thickness of the molten film) has been found. The influence of the parameter caused by the melt of the surface of the low-melting coating of the bearing bush on the bearing capacity and the friction force has been evaluated.

Copyright
© 2018, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the International Conference "Aviamechanical engineering and transport" (AVENT 2018)
Series
Advances in Engineering Research
Publication Date
May 2018
ISBN
10.2991/avent-18.2018.47
ISSN
2352-5401
DOI
10.2991/avent-18.2018.47How to use a DOI?
Copyright
© 2018, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Kamil Samedovich Akhverdiev
AU  - Elena Olegovna Lagunova
AU  - Murman Alexsandrovich Mukutadze
PY  - 2018/05
DA  - 2018/05
TI  - сalculated model of wedge-shaped sliding supports taking into account rheological properties of viscoelastic lubricant
BT  - Proceedings of the International Conference "Aviamechanical engineering and transport" (AVENT 2018)
PB  - Atlantis Press
SP  - 246
EP  - 253
SN  - 2352-5401
UR  - https://doi.org/10.2991/avent-18.2018.47
DO  - 10.2991/avent-18.2018.47
ID  - Akhverdiev2018/05
ER  -