Proceedings of the 2017 2nd International Conference on Automation, Mechanical and Electrical Engineering (AMEE 2017)

Design of the CNC System for Vertical Electrochemical Machining Tool Based on Siemens 802Dsl

Authors
Siguo Yang
Corresponding Author
Siguo Yang
Available Online September 2017.
DOI
10.2991/amee-17.2017.6How to use a DOI?
Keywords
electrochemical machining tool; 802Dsl; CNC system; Linkage
Abstract

The common MCU (Microcontroller Unit) or PLC control method can not meet the linkage processing. 802Dsl numerical control system is adopted in this paper so that four axis and above linkage machining control can be realized in vertical ECM tool which has the advantages of complete functions, high reliability and good stability. With the support of my tutor - Professor / Dr. Chen Yuanlong and his graduate team, design, installation and debugging of NC system have been accomplished according to the modular design method of software side. It has been successfully applied in special processing laboratory of HeFei University of Technology. The design system has a wide range of needs for small and medium enterprises requiring complex molding surface and cavity processing.

Copyright
© 2017, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2017 2nd International Conference on Automation, Mechanical and Electrical Engineering (AMEE 2017)
Series
Advances in Engineering Research
Publication Date
September 2017
ISBN
978-94-6252-393-7
ISSN
2352-5401
DOI
10.2991/amee-17.2017.6How to use a DOI?
Copyright
© 2017, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Siguo Yang
PY  - 2017/09
DA  - 2017/09
TI  - Design of the CNC System for Vertical Electrochemical Machining Tool Based on Siemens 802Dsl
BT  - Proceedings of the 2017 2nd International Conference on Automation, Mechanical and Electrical Engineering (AMEE 2017)
PB  - Atlantis Press
SP  - 27
EP  - 31
SN  - 2352-5401
UR  - https://doi.org/10.2991/amee-17.2017.6
DO  - 10.2991/amee-17.2017.6
ID  - Yang2017/09
ER  -