Shear Property of AZ31B Magnesium Alloy Prepared by Solid -state Recycling
- 10.2991/amcce-18.2018.108How to use a DOI?
- AZ31B magnesium alloy, solid-state recycling, extrusion ratio, shear strength, the bonding between chips
AZ31B Magnesium alloy bars were prepared by solid-state recycling with different extruding ratio of 4:1, 11:1, 25:1, 44:1. Shear tests were conducted through designing and preparing shear specimens and fixture. The bonding between chips in recycled magnesium alloy by solid-state process was successfully characterized through measuring the shear strength along the extruding direction. The effect of extrusion ratio on the shear property of AZ31B magnesium alloys fabricated from chip was studied. In the investigated extrusion ratio range of 4:1 to 44:1, the shear strength along the extruding direction increases with the increasing extruding ratio. This is because recrystallization grain became small and mean, the bonding between chips converts from mechanical bonding to metallurgical bonding and the bonding between chips was enhanced when extruding ratio increase.
- © 2018, the Authors. Published by Atlantis Press.
- Open Access
- This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).
Cite this article
TY - CONF AU - Shuyan Wu AU - Zesheng Ji AU - Zhiqiu Huang AU - Tao Wang AU - Ying Lv AU - Ming Hu PY - 2018/05 DA - 2018/05 TI - Shear Property of AZ31B Magnesium Alloy Prepared by Solid -state Recycling BT - Proceedings of the 2018 3rd International Conference on Automation, Mechanical Control and Computational Engineering (AMCCE 2018) PB - Atlantis Press SP - 631 EP - 636 SN - 2352-5401 UR - https://doi.org/10.2991/amcce-18.2018.108 DO - 10.2991/amcce-18.2018.108 ID - Wu2018/05 ER -