Proceedings of the International Conference "Actual Issues of Mechanical Engineering" (AIME 2018)

Structural diagrams and basic design relationships for the calculation of road safety indicators

Authors
Anatoly Pavlovich Bazhanov
Corresponding Author
Anatoly Pavlovich Bazhanov
Available Online April 2018.
DOI
10.2991/aime-18.2018.16How to use a DOI?
Keywords
quantitative methods of reliability research, structural reliability schemes, layers of road structure, roadway cover defects, determining factors, limit parameters, normal distribution law of random variables
Abstract

main tasks of research and maintenance of reliability at the present stage of designing and construction of highways are stated. The sequence of the analysis of structural reliability schemes of non-rigid road clothes under conditions of impact on them of normal and limiting values of transport - operational loads and weather climatic conditions – is considered. During the analysis of structural reliability schemes, the quantitative characteristics of the reliability of layers of the road structure are determined on the basis of the representation of the physical model of their failure, which includes a complete group of events (failures) of the layers of the road structure and the road structure in general. In this case, the model of failure of each layer is represented by a small number of determining factors (“limiting” parameters, such as the modulus of elasticity, the smoothness of the road surface, rutting, cracking, etc.) allowing their quantitative measurement or calculation according to the corresponding deterministic relationships. These correlations are usually found from the theory of designing the corresponding typical road projects or from the results of specially set experiments.

Copyright
© 2018, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the International Conference "Actual Issues of Mechanical Engineering" (AIME 2018)
Series
Advances in Engineering Research
Publication Date
April 2018
ISBN
978-94-6252-563-4
ISSN
2352-5401
DOI
10.2991/aime-18.2018.16How to use a DOI?
Copyright
© 2018, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Anatoly Pavlovich Bazhanov
PY  - 2018/04
DA  - 2018/04
TI  - Structural diagrams and basic design relationships for the calculation of road safety indicators
BT  - Proceedings of the International Conference "Actual Issues of Mechanical Engineering" (AIME 2018)
PB  - Atlantis Press
SP  - 81
EP  - 84
SN  - 2352-5401
UR  - https://doi.org/10.2991/aime-18.2018.16
DO  - 10.2991/aime-18.2018.16
ID  - Bazhanov2018/04
ER  -