Proceedings of the 2018 2nd International Conference on Advances in Energy, Environment and Chemical Science (AEECS 2018)

Perforation mode of Second-class- Reservoir series adhesive layer

Authors
GuiXia Yang
Corresponding Author
GuiXia Yang
Available Online March 2018.
DOI
10.2991/aeecs-18.2018.6How to use a DOI?
Keywords
Second-Class-Reservoir adhesive layer perforation mode
Abstract

Completion of polymer flooding wells in Second-Class-Reservoir, 46 wells ( 11.1 % ) with interval less than 1m or partial small layers are fully bonded according to logging curves. in principle, some or all of these layers shall be deducted as interval layers before perforation to ensure the development needs. In order to improve the control degree of polymer flooding well and fully excavate the remaining oil, the treatment methods of these adhesive layers are put forward in this paper.

Copyright
© 2018, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2018 2nd International Conference on Advances in Energy, Environment and Chemical Science (AEECS 2018)
Series
Advances in Engineering Research
Publication Date
March 2018
ISBN
978-94-6252-479-8
ISSN
2352-5401
DOI
10.2991/aeecs-18.2018.6How to use a DOI?
Copyright
© 2018, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - GuiXia Yang
PY  - 2018/03
DA  - 2018/03
TI  - Perforation mode of Second-class- Reservoir series adhesive layer
BT  - Proceedings of the 2018 2nd International Conference on Advances in Energy, Environment and Chemical Science (AEECS 2018)
PB  - Atlantis Press
SP  - 24
EP  - 27
SN  - 2352-5401
UR  - https://doi.org/10.2991/aeecs-18.2018.6
DO  - 10.2991/aeecs-18.2018.6
ID  - Yang2018/03
ER  -