An Experimental Study on the Capability test of a Gas leakage checker for Extinguishing Agent Vessels

DOI

10.2991/tmcm-15.2015.2How to use a DOI?

Keywords

capability test; gaseous extinguishing system; gas leakage checker; extinguishing agent vessel

Abstract

In this study the capability test of newly developed gas leakage checkers for gaseous extinguishing systems was conducted. The leakage checker consists of valve body, slip nut, plunger and micro switch etc. Until now extinguishing agent leakage has been checked through direct measuring with a level gauge by a man or measuring its weight using a load cell. The network based leakage checkers for a gaseous fire extinguishing system are able to supervise any gas leakage or discharge for real time 24/7. The working pressure was measured for both leakage checkers and the capability test was repeated 3 times respectively. The averaged working pressure of both leakage checkers were 0.31 bar and 0.30 bar respectively. Consequently the capability of both leakage checkers appeared available.

Copyright

© 2015, the Authors. Published by Atlantis Press.

Open Access

This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

TY  - CONF
AU  - JiHyun Kwark
AU  - SungHo Hong
AU  - MoonSoo Choi
AU  - DongSuk Kim
AU  - GoSeop Roh
PY  - 2015/11
DA  - 2015/11
TI  - An Experimental Study on the Capability test of a Gas leakage checker for Extinguishing Agent Vessels
BT  - Proceedings of the 2015 International Conference on Test, Measurement and Computational Methods
PB  - Atlantis Press
SP  - 5
EP  - 7
SN  - 2352-538X
UR  - https://doi.org/10.2991/tmcm-15.2015.2
DO  - 10.2991/tmcm-15.2015.2
ID  - Kwark2015/11
ER  -