Proceedings of the 2019 International Conference on Precision Machining, Non-Traditional Machining and Intelligent Manufacturing (PNTIM 2019)

Research on Complex Tooth Surface Forming Technology of Spiral Face Gear

Authors
Li Weiwei, Zhu Yuquan, Shang Hanhan, Zhao Yang
Corresponding Author
Zhu Yuquan
Available Online November 2019.
DOI
10.2991/pntim-19.2019.49How to use a DOI?
Keywords
Spiral Face Gear; Hobbing Machining
Abstract

In order to meet the needs of special structural gears in the development of aviation, aerospace and automobile industries, the existing gear processing methods can not meet the processing precision. If it is necessary to pay a large cost to meet the processing precision, a new Processing method - hobbing processing method of spiral face gear. On the basis of a large number of previous studies, based on the differential geometry and spatial meshing principle, the tooth surface equation of the helical face gear is derived and the three-dimensional model is simulated by coordinate transformation and meshing relationship; considering the assembly mode and motion of the hob and the helical face gear Relationship, the machining coordinate system is established, and the helical face gear tooth surface and meshing equation are obtained from the hob-based worm tooth surface equation and the Archimedes worm hob is designed. Finally, the conclusion is given and the research work that needs further development is proposed.

Copyright
© 2019, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2019 International Conference on Precision Machining, Non-Traditional Machining and Intelligent Manufacturing (PNTIM 2019)
Series
Atlantis Highlights in Engineering
Publication Date
November 2019
ISBN
978-94-6252-829-1
ISSN
2589-4943
DOI
10.2991/pntim-19.2019.49How to use a DOI?
Copyright
© 2019, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Li Weiwei
AU  - Zhu Yuquan
AU  - Shang Hanhan
AU  - Zhao Yang
PY  - 2019/11
DA  - 2019/11
TI  - Research on Complex Tooth Surface Forming Technology of Spiral Face Gear
BT  - Proceedings of the 2019 International Conference on Precision Machining, Non-Traditional Machining and Intelligent Manufacturing (PNTIM 2019)
PB  - Atlantis Press
SP  - 241
EP  - 245
SN  - 2589-4943
UR  - https://doi.org/10.2991/pntim-19.2019.49
DO  - 10.2991/pntim-19.2019.49
ID  - Weiwei2019/11
ER  -