Proceedings of the 2019 International Conference on Precision Machining, Non-Traditional Machining and Intelligent Manufacturing (PNTIM 2019)

Design of Spinning Resistance Control System Based on MCU

Authors
Zhao Peng, Yang Gaoxiang, Wang Jia, Zhang Yan
Corresponding Author
Zhao Peng
Available Online November 2019.
DOI
10.2991/pntim-19.2019.25How to use a DOI?
Keywords
Spinning; MCU; Hall Speed; Steering Engine
Abstract

Aiming at the problem of resistance control of spinning bicycle in the process of riding, in order to improve the resistance control of spinning bicycle to be more intelligent, a research on controlling the resistance of spinning bicycle by controlling the Angle change of steering engine based on single chip PWM signal is proposed. The method of simulating control resistance of steering gear is adopted to realize the control design of resistance of spinning bicycle. The design results show that controlling the resistance change of spinning with steering gear can meet the needs of users, provide users with more intelligent physical examination, and improve the fitness enthusiasm. Through simulation, the design results are basically consistent with the design theory, which proves the rationality of the steering gear in the design of the resistance control system of spinning bicycle.

Copyright
© 2019, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2019 International Conference on Precision Machining, Non-Traditional Machining and Intelligent Manufacturing (PNTIM 2019)
Series
Atlantis Highlights in Engineering
Publication Date
November 2019
ISBN
978-94-6252-829-1
ISSN
2589-4943
DOI
10.2991/pntim-19.2019.25How to use a DOI?
Copyright
© 2019, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Zhao Peng
AU  - Yang Gaoxiang
AU  - Wang Jia
AU  - Zhang Yan
PY  - 2019/11
DA  - 2019/11
TI  - Design of Spinning Resistance Control System Based on MCU
BT  - Proceedings of the 2019 International Conference on Precision Machining, Non-Traditional Machining and Intelligent Manufacturing (PNTIM 2019)
PB  - Atlantis Press
SP  - 119
EP  - 122
SN  - 2589-4943
UR  - https://doi.org/10.2991/pntim-19.2019.25
DO  - 10.2991/pntim-19.2019.25
ID  - Peng2019/11
ER  -