Proceedings of the 2017 2nd International Conference on Materials Science, Machinery and Energy Engineering (MSMEE 2017)

Reasearch on Hardness and Fracture Toughness of 45 Steel before and after Hydrogen Sulfide Corrosion

Authors
Yanfei Sun, Jing Wang
Corresponding Author
Yanfei Sun
Available Online May 2017.
DOI
10.2991/msmee-17.2017.235How to use a DOI?
Keywords
Fracture Toughness; Corrosion; Fatigue.
Abstract

The fracture toughness of No.45 steel before and after corrosion is studied in this paper.Two experiments have been carried out about hardness experiment and COD experiment before and after corrosion. And the influence of corrosion condition of the hardness increment and fracture toughness is analyzed here. From the hardness test, we find that the hardness of No.45 steel rise at first and then fall down to the original hardness, and the maximum increment of No.45 steel is 21.From the COD experiment, we find that the stress intensity factor of No.45 steel before and after corrosion are 190.7Mpam1/2 and 149.8 Mpam1/2 respectively while their corresponding average stress of crack tip are 1076Mpa and 845.6Mpa.It can be seen that hydrogen sulfide corrosion increases the brittle facture sensitivity of 45 steel, reduces the fracture toughness, and produces crack tip stress of 230.5Mpa. When we take the hardness of the experimental results into the hardness – stress calibration formula, the hydrogen corrosion generates 239Mpa hydrogen stress. The results of experiment hardness experiment and COD experiment are less than 10% of the crack stress in the COD experiment, which proves that hydrogen corrosion will cause hydrogen stress and then lead to the decrease of fracture toughness.

Copyright
© 2017, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2017 2nd International Conference on Materials Science, Machinery and Energy Engineering (MSMEE 2017)
Series
Advances in Engineering Research
Publication Date
May 2017
ISBN
10.2991/msmee-17.2017.235
ISSN
2352-5401
DOI
10.2991/msmee-17.2017.235How to use a DOI?
Copyright
© 2017, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Yanfei Sun
AU  - Jing Wang
PY  - 2017/05
DA  - 2017/05
TI  - Reasearch on Hardness and Fracture Toughness of 45 Steel before and after Hydrogen Sulfide Corrosion
BT  - Proceedings of the 2017 2nd International Conference on Materials Science, Machinery and Energy Engineering (MSMEE 2017)
PB  - Atlantis Press
SP  - 1248
EP  - 1254
SN  - 2352-5401
UR  - https://doi.org/10.2991/msmee-17.2017.235
DO  - 10.2991/msmee-17.2017.235
ID  - Sun2017/05
ER  -