Research on Design of Heating System of Continuous Heat Transfer Machine

DOI

10.2991/mmssa-18.2019.43How to use a DOI?

Keywords

continuous thermal transfer; hot roller; heat transfer

Abstract

This equipment’s temperature uniformity during continuous thermal transfer process has a critical influence on the transferred product. The bigger surface area of the roller, the poor temperature uniformity caused when heating starts. This study focuses on the thermal analysis of these electric tubes in hot rollers when heating. We use ansys steady-state heat conduction analysis to simulate the electric heating tube with the parameters of different electric power and different heating tube position, and to find the optimum temperature uniformity on the hot roller surface. For example, in the case of thermal transfer equipment, the allowable temperature range of the hot heat roller temperature is 4°C. According to the statistical normal distribution point, we know the larger probability and the smaller range gives the better temperature uniformity. So the temperature difference between the highest temperature and the lowest temperature of the measured temperature value must be within ±2 °C. This temperature difference range is also the effective temperature range in which the hot roller can be used. This paper discusses the related thermal theory of hot roller heating system, and uses the finite element analysis to simulate the numerical simulation ,and to know the roller, s thermal uniformity effect, then to get its refining method. When the temperature uniformity in the simulation meets the temperature accuracy specification, the heat roller implementation and temperature measurement are effective to reduce the development time and promote the quality of the equipment.

Copyright

© 2019, the Authors. Published by Atlantis Press.

Open Access

This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

TY  - CONF
AU  - Mingchu Hsieh
AU  - Jungsen Lin
PY  - 2019/01
DA  - 2019/01
TI  - Research on Design of Heating System of Continuous Heat Transfer Machine
BT  - Proceedings of the 2018 International Conference on Mathematics, Modeling, Simulation and Statistics Application (MMSSA 2018)
PB  - Atlantis Press
SP  - 179
EP  - 182
SN  - 1951-6851
UR  - https://doi.org/10.2991/mmssa-18.2019.43
DO  - 10.2991/mmssa-18.2019.43
ID  - Hsieh2019/01
ER  -