Proceedings of the 6th Mechanical Engineering, Science and Technology International conference (MEST 2022)

Failure Analysis of Drive Motor Bracket on Mini CNC Machine Using Finite Element Analysis Software

Authors
M. Luthfi1, Muchlisinalahuddin1, Desmarita Leni1, M. Rehal1, Rudi Kurniawan Arief1, *
1Muhammadiyah University of West Sumatera, Padang, Indonesia
*Corresponding author. Email: rudikarief@umsb.ac.id
Corresponding Author
Rudi Kurniawan Arief
Available Online 19 April 2023.
DOI
10.2991/978-94-6463-134-0_31How to use a DOI?
Keywords
mini CNC; FEA; simulation; bracket; PLA
Abstract

The local made CNC machine is already available by utilization of CNC router technology, but this machine is not suitable to be used for educational purposes because the construction and movements are not similar to the real CNC machine, therefore the Mechanical Engineering Department UM Sumbar. This machine has been finished and all of the functions are working but some problems occur so that it cannot be used for practicum properly. Therefore, this research was conducted to analyze and examine the problems that occur. The problems occurred related to the failure of the motor drive bracket. It is found that the material is not suitable and also lack of assembly activities indicated.

Copyright
© 2023 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Download article (PDF)

Volume Title
Proceedings of the 6th Mechanical Engineering, Science and Technology International conference (MEST 2022)
Series
Advances in Engineering Research
Publication Date
19 April 2023
ISBN
978-94-6463-134-0
ISSN
2352-5401
DOI
10.2991/978-94-6463-134-0_31How to use a DOI?
Copyright
© 2023 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Cite this article

TY  - CONF
AU  - M. Luthfi
AU  - Muchlisinalahuddin
AU  - Desmarita Leni
AU  - M. Rehal
AU  - Rudi Kurniawan Arief
PY  - 2023
DA  - 2023/04/19
TI  - Failure Analysis of Drive Motor Bracket on Mini CNC Machine Using Finite Element Analysis Software
BT  - Proceedings of the 6th Mechanical Engineering, Science and Technology International conference (MEST 2022)
PB  - Atlantis Press
SP  - 316
EP  - 322
SN  - 2352-5401
UR  - https://doi.org/10.2991/978-94-6463-134-0_31
DO  - 10.2991/978-94-6463-134-0_31
ID  - Luthfi2023
ER  -