Test Bench Design of The Micro Turbine Engine
- DOI
- 10.2991/meic-15.2015.124How to use a DOI?
- Keywords
- Microm Turbine Engine;Thrust Measurement; Test bench;Structural Design; Modal Analysis
- Abstract
In view of the existing micro turbine engine (MTE) design a test bench, which can measurement the key performance parameters. When the micro turbine engine is in operation, we can measurement the exhaust temperature, the vibration, rotate speed of the engine, also the dynamic pressure and static pressure of the exhaust nozzle. This article also introduces the installation method of various measuring sensors. According to characteristic of thrust measurement using CREO based on the piezoelectric force sensor design a six degrees of freedom thrust measuring platform, in the case of normal operation of the micro turbine engine can sense the condition of the thrust in all directions, and then according to the characteristics of the thrust measurement platform confirm the calibration principle. And then based on ANSYS make a modal analysis for the whole thrust measuring bench, get the inherent frequency.
- Copyright
- © 2015, the Authors. Published by Atlantis Press.
- Open Access
- This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).
Cite this article
TY - CONF AU - Qiongying Lv AU - Yazhou Quan PY - 2015/04 DA - 2015/04 TI - Test Bench Design of The Micro Turbine Engine BT - Proceedings of the 2015 International Conference on Mechatronics, Electronic, Industrial and Control Engineering PB - Atlantis Press SP - 543 EP - 546 SN - 2352-5401 UR - https://doi.org/10.2991/meic-15.2015.124 DO - 10.2991/meic-15.2015.124 ID - Lv2015/04 ER -