Proceedings of the 2014 International Conference on Mechatronics, Electronic, Industrial and Control Engineering

Effects of Latent Heat on Cooling Process of the Fused AZS Material

Authors
Luoyuan Li, Daoyuan Yang, Minxiao Ma, Yiming Yin
Corresponding Author
Luoyuan Li
Available Online November 2014.
DOI
10.2991/meic-14.2014.102How to use a DOI?
Keywords
fused AZS material; latent heat; solidification sequence; solidification time; residual melt modulus
Abstract

In order to optimize the production process of the fused Zirconia-Alumina-Silica (AZS) material, the cooling process of fused AZS material was analyzed and the influences of latent heat on solidification sequence, solidification time, temperature gradient and residual melt modulus of cast system were discussed by using AnyCasting software. The results showed that: When latent heat is less than 20000 J/kg, the casting system solidifies perfectly from bottom to top. With the increase of latent heat, the shrinkage defects will be more likely to appear at the center of cast. The maximum temperature gradient and the residual melt modulus of the casting system decreases with the increase of the latent heat, while the solidification time of casting system is prolonged when the latent heat increases. The preferable latent heat of AZS material is 20000 J/kg to optimize the casting system and the production process to improve the cast density and control the defects.

Copyright
© 2014, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2014 International Conference on Mechatronics, Electronic, Industrial and Control Engineering
Series
Advances in Engineering Research
Publication Date
November 2014
ISBN
978-94-62520-42-4
ISSN
2352-5401
DOI
10.2991/meic-14.2014.102How to use a DOI?
Copyright
© 2014, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Luoyuan Li
AU  - Daoyuan Yang
AU  - Minxiao Ma
AU  - Yiming Yin
PY  - 2014/11
DA  - 2014/11
TI  - Effects of Latent Heat on Cooling Process of the Fused AZS Material
BT  - Proceedings of the 2014 International Conference on Mechatronics, Electronic, Industrial and Control Engineering
PB  - Atlantis Press
SP  - 452
EP  - 455
SN  - 2352-5401
UR  - https://doi.org/10.2991/meic-14.2014.102
DO  - 10.2991/meic-14.2014.102
ID  - Li2014/11
ER  -