Proceedings of the 2015 International Conference on Materials Chemistry and Environmental Protection (meep-15)

The Common Features of The Geometry Angle Applied for Hard Cutting Materials

Authors
Z.Y. Wu, X.Y. He, K.W. Ji, X.J. Tang
Corresponding Author
Z.Y. Wu
Available Online March 2016.
DOI
10.2991/meep-15.2016.7How to use a DOI?
Keywords
hard cutting materials; geometry angle; processing parameters; cutting tools
Abstract

With the continuous development of science and technology, the high hardness materials are finding wider and wider application in all fields. But the high hardness make it hard to cut them, which has been a bottleneck to their further application. In this paper, about three hundreds papers on hardness materials cutting were compared, and the distribution of optimal geometry angle was summarized and analyzed. The results can be useful to the related Researches.

Copyright
© 2016, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2015 International Conference on Materials Chemistry and Environmental Protection (meep-15)
Series
Advances in Physics Research
Publication Date
March 2016
ISBN
978-94-6252-169-8
ISSN
2352-541X
DOI
10.2991/meep-15.2016.7How to use a DOI?
Copyright
© 2016, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Z.Y. Wu
AU  - X.Y. He
AU  - K.W. Ji
AU  - X.J. Tang
PY  - 2016/03
DA  - 2016/03
TI  - The Common Features of The Geometry Angle Applied for Hard Cutting Materials
BT  - Proceedings of the 2015 International Conference on Materials Chemistry and Environmental Protection (meep-15)
PB  - Atlantis Press
SP  - 26
EP  - 28
SN  - 2352-541X
UR  - https://doi.org/10.2991/meep-15.2016.7
DO  - 10.2991/meep-15.2016.7
ID  - Wu2016/03
ER  -