Proceedings of the 2018 International Conference on Mechanical, Electronic, Control and Automation Engineering (MECAE 2018)

Research on Surface Micro Pattern Generation in Turn-Milling Considering Ball-End Milling Cutter Eccentricity

Authors
Huiqun Chen, Jiliang Hu
Corresponding Author
Huiqun Chen
Available Online March 2018.
DOI
https://doi.org/10.2991/mecae-18.2018.149How to use a DOI?
Keywords
turn-milling, surface micro-pattern, ball-end milling cutter, cutter eccentricity.
Abstract

The mathematical model of machined workpiece by orthogonal turn-milling with ball-end milling cutter is established, which takes the effect of ball-end milling cutter eccentricity into account. The simulation steps and flow chart of the algorithm are also given in this paper. The relation between representative turn-milling parameters (feed per tooth) and machined surface micro-pattern has been ascertained, which provides evaluation mechanisms reference for surface micro-pattern in the turn-milling affected by other machining parameters, the surface micro-pattern simulation is developed base on computer programming. The consistency of surface micro-pattern in simulation and machining experiment is verified, which is in the aspect of shapes and positions layout of peaks and valleys on the micro-pattern. This model is effective and feasible that it also can provide a basis for rational selection of cutting parameters in turn-milling.

Copyright
© 2018, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2018 International Conference on Mechanical, Electronic, Control and Automation Engineering (MECAE 2018)
Series
Advances in Engineering Research
Publication Date
March 2018
ISBN
978-94-6252-493-4
ISSN
2352-5401
DOI
https://doi.org/10.2991/mecae-18.2018.149How to use a DOI?
Copyright
© 2018, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Huiqun Chen
AU  - Jiliang Hu
PY  - 2018/03
DA  - 2018/03
TI  - Research on Surface Micro Pattern Generation in Turn-Milling Considering Ball-End Milling Cutter Eccentricity
BT  - Proceedings of the 2018 International Conference on Mechanical, Electronic, Control and Automation Engineering (MECAE 2018)
PB  - Atlantis Press
SP  - 160
EP  - 168
SN  - 2352-5401
UR  - https://doi.org/10.2991/mecae-18.2018.149
DO  - https://doi.org/10.2991/mecae-18.2018.149
ID  - Chen2018/03
ER  -