Proceedings of the 2017 7th International Conference on Mechatronics, Computer and Education Informationization (MCEI 2017)

New Cutting Method of Skew Bevel Gear Based on the Tooth Generating Line

Authors
Peng Gu, Xinping Yu, Xia Liu
Corresponding Author
Peng Gu
Available Online December 2017.
DOI
10.2991/mcei-17.2017.212How to use a DOI?
Keywords
Bevel gear; Generating line; Spherical involute; Milling method
Abstract

The generating principle of skew bevel gear tooth face is analyzed about spherical involute, base cone and base plane that tangent to the base cone is constructed. Firstly, based on the relevant motion between the base cone and the generating line in the generating process of tooth surface, a new machining method of skew bevel gear using disc milling tool is explored. Secondly, motion equation of finish machining is set up by cutting process analysis. Finally, structure of machine and cutter is designed and the performance of this method is verified by experimental results. The result indicates that: the milling process of the skew bevel gear with no theoretic error can be realized by 3-axis linkage based on the proposed theory that has a simple motion and easy to be controlled.

Copyright
© 2017, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2017 7th International Conference on Mechatronics, Computer and Education Informationization (MCEI 2017)
Series
Advances in Computer Science Research
Publication Date
December 2017
ISBN
978-94-6252-430-9
ISSN
2352-538X
DOI
10.2991/mcei-17.2017.212How to use a DOI?
Copyright
© 2017, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Peng Gu
AU  - Xinping Yu
AU  - Xia Liu
PY  - 2017/12
DA  - 2017/12
TI  - New Cutting Method of Skew Bevel Gear Based on the Tooth Generating Line
BT  - Proceedings of the 2017 7th International Conference on Mechatronics, Computer and Education Informationization (MCEI 2017)
PB  - Atlantis Press
SP  - 985
EP  - 991
SN  - 2352-538X
UR  - https://doi.org/10.2991/mcei-17.2017.212
DO  - 10.2991/mcei-17.2017.212
ID  - Gu2017/12
ER  -