Proceedings of the 2016 6th International Conference on Mechatronics, Computer and Education Informationization (MCEI 2016)

Influence of SLA rapid prototyping process parameters on the forming precision

Authors
Yaru Shi, Yan Cao, Yongming Wang, Liang Huang
Corresponding Author
Yaru Shi
Available Online December 2016.
DOI
10.2991/mcei-16.2016.294How to use a DOI?
Keywords
Rapid die manufacturing technology; SLA; Orthogonal test method; Optimal parameters
Abstract

Therefore, the development of new die design and manufacturing technology is imperative. Light curing rapid prototyping technology is the earliest developed in rapid prototyping manufacturing technology. The technology has great prospects for the manufacture of irregular complex parts. In this paper, the theoretical analysis of the early data processing, the influence of various factors on the forming precision is analyzed. In order to make the parts get a higher precision, the 4 most important factors affecting the molding process parameters are obtained by the orthogonal experiment method: Spot diameter compensation, layer thickness, scanning speed, scanning distance of these four factors are analyzed. Get the most effective parameter setting, in order to achieve the purpose of improving the forming precision of the workpiece.

Copyright
© 2017, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2016 6th International Conference on Mechatronics, Computer and Education Informationization (MCEI 2016)
Series
Advances in Intelligent Systems Research
Publication Date
December 2016
ISBN
978-94-6252-282-4
ISSN
1951-6851
DOI
10.2991/mcei-16.2016.294How to use a DOI?
Copyright
© 2017, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Yaru Shi
AU  - Yan Cao
AU  - Yongming Wang
AU  - Liang Huang
PY  - 2016/12
DA  - 2016/12
TI  - Influence of SLA rapid prototyping process parameters on the forming precision
BT  - Proceedings of the 2016 6th International Conference on Mechatronics, Computer and Education Informationization (MCEI 2016)
PB  - Atlantis Press
SP  - 1448
EP  - 1452
SN  - 1951-6851
UR  - https://doi.org/10.2991/mcei-16.2016.294
DO  - 10.2991/mcei-16.2016.294
ID  - Shi2016/12
ER  -