Evaluation on Eddy Current Test Probe Performance

DOI

10.2991/978-94-6463-480-8_4How to use a DOI?

Keywords

ECT; Probe; Impedance; Probe Geometry; Resonance Frequency

Abstract

Eddy current non destructive test (ECT) were used for decades to assess magnetic conductive materials considering its reliability and its portability. The success of the ECT process mainly depends on the performance of the ECT’s probe. The performance of the probe can be evaluated by applying frequency swept test which done by injecting a certain range of frequency to the probe and evaluate the reactance as the response of the probe. In this paper the fabricated helical probe is evaluated to assess its performance. From the test, the probe will work properly when the injected frequency range from 100 kHz to 1 MHz, and by calculation probe has depth penetration capability of 12.77 mm with excellent capability to perform as the probe of eddy current non destructive test.

Copyright

© 2024 The Author(s)

Open Access

Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Download article (PDF)

TY  - CONF
AU  - Reyhan Zuhdi Aditama
AU  - Samsudi Rahardjo
AU  - Dini Cahyandari
PY  - 2024
DA  - 2024/07/29
TI  - Evaluation on Eddy Current Test Probe Performance
BT  - Proceedings of the 2nd Lawang Sewu Internasional Symposium on Engineering and Applied Sciences (LEWIS-EAS 2023)
PB  - Atlantis Press
SP  - 26
EP  - 38
SN  - 2352-5401
UR  - https://doi.org/10.2991/978-94-6463-480-8_4
DO  - 10.2991/978-94-6463-480-8_4
ID  - Aditama2024
ER  -