Proceedings of the 2015 Joint International Mechanical, Electronic and Information Technology Conference

Numerical Simulation about the Effect of Stator Pitch and StatorThickness on Contact Pressure of Progressive Cavity Pump

Authors
Weiyue Xu, Zungang Yuan, Guiling Deng
Corresponding Author
Weiyue Xu
Available Online December 2015.
DOI
10.2991/jimet-15.2015.219How to use a DOI?
Keywords
finite element analysis, conventional PCP, even-thickness PCP, stator pitch, stator thickness, contact pressure.
Abstract

Progressive cavity metering pump(PCP) which is especially good for the transmission of high viscosity liquids containing solid grains has been wildly used in electronic packaging industry in recent years. Due to the existence of pipeline pressure, adequate hydraulic sealing pressure is necessitated to prevent back-flow especially in high accuracy liquid transmission situations. There is a positive correlativity between hydraulic sealing pressure and contact pressure of PCP, so three-dimensional finite element models of PCP with high quality hexahedral mesh divided by ANSYS-ICEM is established to study the effect of stator pitch and stator thickness on contact pressure of PCP.

Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2015 Joint International Mechanical, Electronic and Information Technology Conference
Series
Advances in Computer Science Research
Publication Date
December 2015
ISBN
978-94-6252-129-2
ISSN
2352-538X
DOI
10.2991/jimet-15.2015.219How to use a DOI?
Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Weiyue Xu
AU  - Zungang Yuan
AU  - Guiling Deng
PY  - 2015/12
DA  - 2015/12
TI  - Numerical Simulation about the Effect of Stator Pitch and StatorThickness on Contact Pressure of Progressive Cavity Pump
BT  - Proceedings of the 2015 Joint International Mechanical, Electronic and Information Technology Conference
PB  - Atlantis Press
SP  - 1161
EP  - 1165
SN  - 2352-538X
UR  - https://doi.org/10.2991/jimet-15.2015.219
DO  - 10.2991/jimet-15.2015.219
ID  - Xu2015/12
ER  -