Study on underwater connector temperature and pressure testing technology

DOI

10.2991/jimet-15.2015.159How to use a DOI?

Keywords

underwater connector; test standard; temperature and pressure test device; finite element analysis

Abstract

the paper has researched the relevant authority standards of domestic and international such as ISO 10423, ISO 13628, API SEPC 17D, ISO 13679, ISO 21329, API Spec 6A, then determined the designed parameters of the temperature pressure test connector. And, the test device was designed according to the test requirement. The device is consist of heating unit, cooling unit and insulation unit. Finally, select heating the oil tank as the heating method, vaporization of the liquid nitrogen as the cooling methods, insulation materials and temperature compensation as the heat maintaining method. Ansys simulation was performed for the testing procedure. Reliable temperature gradient of the testing was obtained. At last, some suggestion was presented for the temperature control difficulty in the testing.

Copyright

© 2015, the Authors. Published by Atlantis Press.

Open Access

This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

TY  - CONF
AU  - Jun Liu
AU  - Yuchen Wang
AU  - Baoshuang Shi
AU  - Daoming Wang
AU  - Liquan Wang
AU  - Xiangjuan Xu
PY  - 2015/12
DA  - 2015/12
TI  - Study on underwater connector temperature and pressure testing technology
BT  - Proceedings of the 2015 Joint International Mechanical, Electronic and Information Technology Conference
PB  - Atlantis Press
SP  - 853
EP  - 862
SN  - 2352-538X
UR  - https://doi.org/10.2991/jimet-15.2015.159
DO  - 10.2991/jimet-15.2015.159
ID  - Liu2015/12
ER  -