Study on Crushing Mechanism of Cone Crusher

DOI

10.2991/jimec-17.2017.132How to use a DOI?

Keywords

EDEM;single particle crushing model;fracture;abrasion

Abstract

The single particle crushing model is studied by EDEM software, and the model is extruded with different speeds and different angles. Using horizontal angle of 0 degrees, 20 degrees, 30 degrees, 45 degrees, 60 degrees, 70 degrees plate to squeeze the single particle model, the results show that the ore material is more easily broken down under the complicated stress of tensile shear, when the angle of the plate is 45 degrees,the board change can come to the conclusion that the impact crushing can make the material more easily broken.Simulation of lining wear process, the simulation results show that the wear rate of the dynamic cone is varied, and there is a best speed of the eccentric body.

Copyright

© 2017, the Authors. Published by Atlantis Press.

Open Access

This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

TY  - CONF
AU  - Hongjun Yu
AU  - Qiou Fei
AU  - Rujie Wang
AU  - Binglu Fan
AU  - Yamin Wang
AU  - Boqiang Shi
PY  - 2017/10
DA  - 2017/10
TI  - Study on Crushing Mechanism of Cone Crusher
BT  - Proceedings of the 2017 2nd Joint International Information Technology, Mechanical and Electronic Engineering Conference (JIMEC 2017)
PB  - Atlantis Press
SP  - 612
EP  - 616
SN  - 2352-538X
UR  - https://doi.org/10.2991/jimec-17.2017.132
DO  - 10.2991/jimec-17.2017.132
ID  - Yu2017/10
ER  -