Proceedings of the 2nd International Symposium on Transportation Studies in Developing Countries (ISTSDC 2019)

Design and Load Analysis Toward the Strength of Rim Modification Using SolidWorks Software on Motorcycle as a City Transportation

Authors
Yuspian Gunawan, Samhuddin, Fitria Masud, Nanang Endriatno, Muh. Yamin, Muslimin
Corresponding Author
Yuspian Gunawan
Available Online 25 February 2020.
DOI
10.2991/aer.k.200220.016How to use a DOI?
Keywords
loading, modified rim, cast wheel, SolidWorks software, city transportation
Abstract

The purpose of this study was to design and analyze the loading of the modified rim strength (cast wheel type) on the motorcycle. The method used is to use SolidWorks software, loading simulation analysis performed with 3 variations of the rim model and three (3) variations in the number of spoke (8, 6, and 4 spoke) at a speed of 70 km/hour. Research results show almost all the modified rim models (cast wheel type) were analyzed get a safety factor score included in the category of safe to use, except the rim of model A with 4 spokes. Modified rims (cast wheel type) model A with the number of spoke 4 obtain the largest maximum stress value of 3.157 × 108 N/m2, while the smallest maximum stress value is obtained on the rim of model C with the number of spoke 4 which is equal to 2.753 × 108 N/m2.

Copyright
© 2020, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2nd International Symposium on Transportation Studies in Developing Countries (ISTSDC 2019)
Series
Advances in Engineering Research
Publication Date
25 February 2020
ISBN
978-94-6252-913-7
ISSN
2352-5401
DOI
10.2991/aer.k.200220.016How to use a DOI?
Copyright
© 2020, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Yuspian Gunawan
AU  - Samhuddin
AU  - Fitria Masud
AU  - Nanang Endriatno
AU  - Muh. Yamin
AU  - Muslimin
PY  - 2020
DA  - 2020/02/25
TI  - Design and Load Analysis Toward the Strength of Rim Modification Using SolidWorks Software on Motorcycle as a City Transportation
BT  - Proceedings of the 2nd International Symposium on Transportation Studies in Developing Countries (ISTSDC 2019)
PB  - Atlantis Press
SP  - 77
EP  - 81
SN  - 2352-5401
UR  - https://doi.org/10.2991/aer.k.200220.016
DO  - 10.2991/aer.k.200220.016
ID  - Gunawan2020
ER  -