Single Phase Active Filter Performance Study For Electrical Loads In Residential Home
- DOI
- 10.2991/aer.k.201221.027How to use a DOI?
- Keywords
- Harmonics, Non-linear load, Active filter, Residential loads
- Abstract
Along with the development of electronics technology, electrical loads are also developing. Originally, electrical loads are linear. However, as a result of the development of electronics technology, a non-linear electrical loads appear. Non-linear loads installed in a single phase power system such as computers, air conditioners, televisions, and energy saving lamps can produce current or voltage harmonic distortion. The greater the harmonic content of a system, the worse the quality of the power it produces. The use of harmonic filters in electrical power systems has been proven to be able to reduce voltage and current harmonic distortions caused by non-linear loads. The active filters is one solution to harmonic interference problem. This research aims to study the performance of active filters to compensate harmonics currents that can improve the quality of power in residential houses. The result obtained from this research is that electrical loads in residential houses have very high harmonics components, with Total Harmonic Distortion (THDi) reaching up to 183%. By installing an active filter in parallel with the non-linear loads, THDi could be reduced up to 9.5%.
- Copyright
- © 2020, the Authors. Published by Atlantis Press.
- Open Access
- This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).
Cite this article
TY - CONF AU - Hasan Surya AU - Sarjono Wahyujadmiko PY - 2020 DA - 2020/12/22 TI - Single Phase Active Filter Performance Study For Electrical Loads In Residential Home BT - Proceedings of the International Seminar of Science and Applied Technology (ISSAT 2020) PB - Atlantis Press SP - 157 EP - 160 SN - 2352-5401 UR - https://doi.org/10.2991/aer.k.201221.027 DO - 10.2991/aer.k.201221.027 ID - Surya2020 ER -