Molding process and experimental research on a circular composite fragile cover
Authors
Deng’an Cai, Guangming Zhou, Xiaopei Wang, Honghao Yu
Corresponding Author
Deng’an Cai
Available Online April 2015.
- DOI
- 10.2991/isrme-15.2015.340How to use a DOI?
- Keywords
- composite fragile cover, molding process, weak zone, failure pressure.
- Abstract
The overall structure and the weak zone of a new circular composite fragile cover have been presented. In fabrication of the fragile cover, a particular hand lay-up molding process is proposed. The deflection and failure pressure of the circular composite fragile cover have been experimentally investigated. The results show that the deflections of cover center will grow nonlinearly along with the increasing gas pressure and have less distinction with different height of weak zone. The failure pressure of the cover first increases and then decreases with the increasing height of the weak zone, which obtains the maximum value of 0.79 MPa at the weak zone height of 18 mm.
- Copyright
- © 2015, the Authors. Published by Atlantis Press.
- Open Access
- This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).
Cite this article
TY - CONF AU - Deng’an Cai AU - Guangming Zhou AU - Xiaopei Wang AU - Honghao Yu PY - 2015/04 DA - 2015/04 TI - Molding process and experimental research on a circular composite fragile cover BT - Proceedings of the 2015 International Conference on Intelligent Systems Research and Mechatronics Engineering PB - Atlantis Press SP - 1677 EP - 1681 SN - 1951-6851 UR - https://doi.org/10.2991/isrme-15.2015.340 DO - 10.2991/isrme-15.2015.340 ID - Cai2015/04 ER -