Proceedings of the 2015 International Conference on Intelligent Systems Research and Mechatronics Engineering

The Study of Bolt up Sequence Influence of the Bolted Assembly Structure Contact Stiffness

Authors
Zhen He, Qingli Wang
Corresponding Author
Zhen He
Available Online April 2015.
DOI
10.2991/isrme-15.2015.330How to use a DOI?
Keywords
Tightening sequence; Contact stiffness; Experimental modal analysis; modal frequency.
Abstract

According to the existence problems of study on the mechanism of contact stiffness of bolted assembly structure formed by tightening sequence, a TK model of single bolt structure is established; then the frequency characteristics of combined surface under different TS was analyzed by using ANSYS; the optimal TS is obtained based on the frequency and the interface stiffness mapping. At last, a group of experiments was done to verify the above conclusions. The results show that the interface stiffness is verify under different TS, and so does the first rank natural frequency of the structure; the nonlinear response of the structure is significantly affected by TS that tighten at the same time is the optimal method compared with other TS. A small error of modal frequency between simulating and testing proves that the modeling method can effectively analyze impacts of the TS on the dynamic properties of the interface.

Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2015 International Conference on Intelligent Systems Research and Mechatronics Engineering
Series
Advances in Intelligent Systems Research
Publication Date
April 2015
ISBN
978-94-62520-59-2
ISSN
1951-6851
DOI
10.2991/isrme-15.2015.330How to use a DOI?
Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Zhen He
AU  - Qingli Wang
PY  - 2015/04
DA  - 2015/04
TI  - The Study of Bolt up Sequence Influence of the Bolted Assembly Structure Contact Stiffness
BT  - Proceedings of the 2015 International Conference on Intelligent Systems Research and Mechatronics Engineering
PB  - Atlantis Press
SP  - 1627
EP  - 1630
SN  - 1951-6851
UR  - https://doi.org/10.2991/isrme-15.2015.330
DO  - 10.2991/isrme-15.2015.330
ID  - He2015/04
ER  -