Bench Tests for Choosing the Best Device Operation Parameters when Applying Impulse Non-Stationary Flooding of Hydrocarbon Reservoirs

DOI

10.2991/isees-19.2019.39How to use a DOI?

Keywords

laboratory; bench; impulse; fluid; parameters; method; sandy; sample.

Abstract

The bench was developed in the laboratory of hydraulic devices at the Department of Oil and Gas Machines and Equipment. It allows to create conditions that are close to the conditions of the downhole of any well. Laboratory and experimental studies conducted on the bench included two stages: a) research of output parameters and the corresponding selection of the optimal design parameters of the devices that are being developed; b) study of the influence of pressure and frequency of fluid impulses on the penetration of the hydraulic fluid in sand samples.

Copyright

© 2019, the Authors. Published by Atlantis Press.

Open Access

This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

TY  - CONF
AU  - M.Ya. Khabibullin
PY  - 2019/08
DA  - 2019/08
TI  - Bench Tests for Choosing the Best Device Operation Parameters when Applying Impulse Non-Stationary Flooding of Hydrocarbon Reservoirs
BT  - Proceedings of the International Symposium "Engineering and Earth Sciences: Applied and Fundamental Research" dedicated to the 85th anniversary of H.I. Ibragimov (ISEES 2019)
PB  - Atlantis Press
SP  - 627
EP  - 631
SN  - 2590-3217
UR  - https://doi.org/10.2991/isees-19.2019.39
DO  - 10.2991/isees-19.2019.39
ID  - Khabibullin2019/08
ER  -