Proceedings of the International Joint Conference on Science and Engineering 2022 (IJCSE 2022)

IoT-Based Flow Control System Using Node MCU with PI Controller CHR Tuning Method

Authors
Rifqi Firmansyah1, Mustafa M. A. Seedahmed1, Alharith Mahmoud2, Yuli Sutoto Nugroho3, *, Pressa Perdana Surya Saputra4
1Department of Electrical and Computer Engineering, King Adulaziz University, Jeddah, 21589, Saudi Arabia
2Safat Aviation Complex, Al Khurtum, Sudan
3Department of Electrical Engineering, Universitas Negeri Surabaya, Surabaya, Indonesia
4Electrical Engineering Department, Universitas Muhammadiyah Gresik, Gresik, Indonesia
*Corresponding author. Email: yulinugroho@unesa.ac.id
Corresponding Author
Yuli Sutoto Nugroho
Available Online 27 December 2022.
DOI
10.2991/978-94-6463-100-5_19How to use a DOI?
Keywords
Chien Hrones Reswick; IoT; Turning Method
Abstract

In community life, the availability of clean water has been decreasing with the decrease in water quality of community consumption. This is obtained from reality and surveys in several villages. Compared with the results of reports from the National Statistics Agency, the province is very volatile and tends to increase every year. In this event, there is an imbalance between the report and reality so sometimes the community can not do anything. it is better if the community or everyone should control the use of clean water. This is an effort to stabilize the availability of clean water in the community. The objective of this study is to provide solutions to tackle those problems by controlling the water flow through a smartphone. Therefore, the consumers who get less water distribution for their daily needs will decrease. The method used to regulate the water flow rate is PI control with the Chien Hrones Reswick (CHR) tuning method. The results show that the Chien Hrones Reswick method produces a better and faster response to achieve a stable condition. Furthermore, when the system is given a disturbance, the response from the sensor can reach a stable condition. Moreover, when the setpoint is changed, the response from the sensor can still follow the setpoint changes and can achieve a good and fast steady state.

Copyright
© 2022 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Download article (PDF)

Volume Title
Proceedings of the International Joint Conference on Science and Engineering 2022 (IJCSE 2022)
Series
Advances in Engineering Research
Publication Date
27 December 2022
ISBN
978-94-6463-100-5
ISSN
2352-5401
DOI
10.2991/978-94-6463-100-5_19How to use a DOI?
Copyright
© 2022 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Cite this article

TY  - CONF
AU  - Rifqi Firmansyah
AU  - Mustafa M. A. Seedahmed
AU  - Alharith Mahmoud
AU  - Yuli Sutoto Nugroho
AU  - Pressa Perdana Surya Saputra
PY  - 2022
DA  - 2022/12/27
TI  - IoT-Based Flow Control System Using Node MCU with PI Controller CHR Tuning Method
BT  - Proceedings of the International Joint Conference on Science and Engineering 2022 (IJCSE 2022)
PB  - Atlantis Press
SP  - 186
EP  - 195
SN  - 2352-5401
UR  - https://doi.org/10.2991/978-94-6463-100-5_19
DO  - 10.2991/978-94-6463-100-5_19
ID  - Firmansyah2022
ER  -