Improvement of gear pitch machining accuracy based on the principle of phase-transfer gear-grinding technique

DOI

10.2991/ifeesm-17.2018.115How to use a DOI?

Keywords

Phase transfer,Indexing error,Pitch deviation,Gear grinding Technology

Abstract

In order to improve the pitch machining accuracy of gear artefacts, based on the extraction method of the systematic indexing error (SIE), the phase-transfer gear-grinding technique (PGT) was proposed by taking the SIE curve interfere with its phase-transfer error curve. First, the SIE curve of the gear grinding machine (GGM) was precisely extracted by adopting the 36 polygon mirror which was precisely calibrated by using the closure measurement method and the autocollimator, and the maximum indexing error is obtained as 6.82. Then the characteristics and the phase-transfer strategies to eliminate the main harmonic component of the SIE curve of the GGM was analysed. Finally, precision grinding experiments were carried out by adopting the traditional gear-grinding technique (TGT) and the PGT. The experiments show that, the total cumulative pitch deviation of gear specimen is obtained as 2.57 m by adopting the TGT, and the relative error is increased approximately by 24% comparing with the SIE. However, the total cumulative pitch deviation of gear specimen is obtained as 1.34 m by adopting the PGT, and the relative error is reduced approximately by 36% comparing with the SIE. The results show that the pitch machining accuracy of the gear specimen is significantly improved and is higher than the indexing accuracy of the GGM by adopting PGT, and the pitch deviations of the gear specimen achieve the highest class of the current gear standards. The researches have important guiding significance for the development of ultra-precision indexing components, including gear artefacts, indexing plates, end-tooth plates, indexing worm gears, the harmonic gears and so on.

Copyright

© 2018, the Authors. Published by Atlantis Press.

Open Access

This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

TY  - CONF
AU  - Siying Ling
AU  - Kun Wang
AU  - Baodi Yu
AU  - Xiaodong Wang
AU  - Liding Wang
PY  - 2018/02
DA  - 2018/02
TI  - Improvement of gear pitch machining accuracy based on the principle of phase-transfer gear-grinding technique
BT  - Proceedings of the 2017 3rd International Forum on Energy, Environment Science and Materials (IFEESM 2017)
PB  - Atlantis Press
SP  - 607
EP  - 614
SN  - 2352-5401
UR  - https://doi.org/10.2991/ifeesm-17.2018.115
DO  - 10.2991/ifeesm-17.2018.115
ID  - Ling2018/02
ER  -