The Comparison on the Side Feed Mode of Micro-strip Patch

DOI

10.2991/icsnce-18.2018.21How to use a DOI?

Keywords

HFSS Simulation; Micro-strip Patch; Side-feed; Slot; Matching

Abstract

The feeding of the micro-strip patch is flexible and complex, especially side feeding. In this paper, a single micro-strip patch antenna with a center frequency of 2.45GHZ is taken as an example to explore the performance of the slotted feed and non-slotted feed and verified in HFSS15.0. Combined with HFSS15.0 software simulation and theoretical calculation, the corresponding conclusions can be obtained. The theoretical value and simulation results will show that: the required 1/4 converter sizes of the non-slotted side feed and slotted side feed are different. By contrasting with sizes of two feeding modes, electrical size of the slotted feed is smaller. It can be known that all performances of the slotted feed are more superior.

Copyright

© 2018, the Authors. Published by Atlantis Press.

Open Access

This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

TY  - CONF
AU  - Dang Wen
AU  - Liu Xinliang
PY  - 2018/04
DA  - 2018/04
TI  - The Comparison on the Side Feed Mode of Micro-strip Patch
BT  - Proceedings of the 2018 Second International Conference of Sensor Network and Computer Engineering (ICSNCE 2018)
PB  - Atlantis Press
SP  - 101
EP  - 104
SN  - 2352-538X
UR  - https://doi.org/10.2991/icsnce-18.2018.21
DO  - 10.2991/icsnce-18.2018.21
ID  - Wen2018/04
ER  -