Proceedings of the 2016 4th International Conference on Sensors, Mechatronics and Automation (ICSMA 2016)

Modeling and Simulation of Hall Voltage Sensor Based on Physical Modeling Environment

Authors
Chunming Li, Yan Xu, Tian Ma
Corresponding Author
Chunming Li
Available Online December 2016.
DOI
10.2991/icsma-16.2016.72How to use a DOI?
Keywords
Hall Voltage Sensor, Hall Effect, Simulation Model
Abstract

Hall voltage sensor is one of the most widely used sensors in the field of today's electronic measurement. It can completely replace the traditional transformer and shunt, and with the advantages of high precision, good linearity, wide frequency band, fast response, strong overload capacity and without losing the energy of measurement circuit, etc. This article by MATLAB / simulink simulation tool establishes under a Simscape modeling environment can reflect the hall voltage sensor measurement principle, internal mechanism and the measurement error of the simulation model. The model reflects the principle and internal structure of the closed-loop hall voltage sensor, introduces the interference terms such as noise, and the model has no load effect on the measuring circuit, so that the simulation system can better reflect the actual situation.

Copyright
© 2016, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2016 4th International Conference on Sensors, Mechatronics and Automation (ICSMA 2016)
Series
Advances in Intelligent Systems Research
Publication Date
December 2016
ISBN
978-94-6252-274-9
ISSN
1951-6851
DOI
10.2991/icsma-16.2016.72How to use a DOI?
Copyright
© 2016, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Chunming Li
AU  - Yan Xu
AU  - Tian Ma
PY  - 2016/12
DA  - 2016/12
TI  - Modeling and Simulation of Hall Voltage Sensor Based on Physical Modeling Environment
BT  - Proceedings of the 2016 4th International Conference on Sensors, Mechatronics and Automation (ICSMA 2016)
PB  - Atlantis Press
SP  - 405
EP  - 408
SN  - 1951-6851
UR  - https://doi.org/10.2991/icsma-16.2016.72
DO  - 10.2991/icsma-16.2016.72
ID  - Li2016/12
ER  -