Study on the Key Technology of 3D Printing Pure Titanium Metal Porcelain Teeth
Authors
Jinjun Tang, Yulei Li, Yuelai Dai, Xiaoyu Jin, Qun Wang
Corresponding Author
Jinjun Tang
Available Online April 2016.
- DOI
- 10.2991/icseee-15.2016.133How to use a DOI?
- Keywords
- laser rapid forming; titanium; metallurgical; 3D printing technology
- Abstract
Using laser scanning system for preparation of abutment body of data acquisition and accuracy analysis for the reconstruction of 3D laser scanner abutment preparations and by the method of reverse engineering established the 3D digital model of the simulated abutment, using professional software to simulation of abutment shape completes calculation machine aided design base crown. At the same time, the process parameters of laser rapid forming of pure titanium metal powder were tested by orthogonal design, and the process parameters were optimized by single pass multi-layer cladding forming experiment.
- Copyright
- © 2016, the Authors. Published by Atlantis Press.
- Open Access
- This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).
Cite this article
TY - CONF AU - Jinjun Tang AU - Yulei Li AU - Yuelai Dai AU - Xiaoyu Jin AU - Qun Wang PY - 2016/04 DA - 2016/04 TI - Study on the Key Technology of 3D Printing Pure Titanium Metal Porcelain Teeth BT - Proceedings of the 2015 4th International Conference on Sustainable Energy and Environmental Engineering PB - Atlantis Press SP - 776 EP - 779 SN - 2352-5401 UR - https://doi.org/10.2991/icseee-15.2016.133 DO - 10.2991/icseee-15.2016.133 ID - Tang2016/04 ER -