Proceedings of the 2nd International Conference on Consumer Technology and Engineering Innovation (ICONTENTION 2023)

<Previous Article In Volume
Next Article In Volume>

Design of Fume Extrator for SMAW Welding in Nusa Putra University Mechanical Engineering Workshop

Authors
Erik Suwandana1, *, Dida Kadarisman1, dan Qodratullah1, Fabrobi Ridha1
1Universitas Nusa Putra, Sukabumi, Indonesia
*Corresponding author. Email: erik.suwandana_tm21@nusaputra.ac.id
Corresponding Author
Erik Suwandana
Available Online 13 May 2024.
DOI
10.2991/978-94-6463-406-8_13How to use a DOI?
Keywords
SMAW Fume Extractor; Mechanical Engineering Workshop; Extractor Design Analysis
Abstract

Nusa Putra University has a mechanical engineering workshop with various tools including the SMAW welding machine. Students use this machine to do practicum and learn how to increase the welding skills. However, the air circulation does not support welding fume release. A Fume Extractor is a system that is designed to reduce and control the emissions of gases and particles generated during the welding process. This research aims to design and implement a specialized Fume Extractor system for welding activities in the Mechanical Engineering Workshop of Nusa Putra University. The research method includes literature review, surveys, and interviews with relevant personnel in the Mechanical Engineering Workshop, as well as the collection of data and parameters related to airflow. This data will be used to analyze the airflow requirements needed to effectively capture and eliminate emissions. Subsequently, based on the requirements analysis, a Fume Extractor design concept that meets the necessary specifications will be developed. The results of this research to provides an optimal Fume Extractor with a fan extraction rate of 807.84 m3/hr. The design recommendation is able to address emission issues in the Mechanical Engineering Workshop of Nusa Putra University.

Copyright
© 2024 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Download article (PDF)

<Previous Article In Volume
Next Article In Volume>
Volume Title
Proceedings of the 2nd International Conference on Consumer Technology and Engineering Innovation (ICONTENTION 2023)
Series
Advances in Engineering Research
Publication Date
13 May 2024
ISBN
10.2991/978-94-6463-406-8_13
ISSN
2352-5401
DOI
10.2991/978-94-6463-406-8_13How to use a DOI?
Copyright
© 2024 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Cite this article

risenwbib
TY  - CONF
AU  - Erik Suwandana
AU  - Dida Kadarisman
AU  - dan Qodratullah
AU  - Fabrobi Ridha
PY  - 2024
DA  - 2024/05/13
TI  - Design of Fume Extrator for SMAW Welding in Nusa Putra University Mechanical Engineering Workshop
BT  - Proceedings of the 2nd International Conference on Consumer Technology and Engineering Innovation (ICONTENTION 2023)
PB  - Atlantis Press
SP  - 65
EP  - 74
SN  - 2352-5401
UR  - https://doi.org/10.2991/978-94-6463-406-8_13
DO  - 10.2991/978-94-6463-406-8_13
ID  - Suwandana2024
ER  -