Proceedings of the 2nd International Conference on Consumer Technology and Engineering Innovation (ICONTENTION 2023)

<Previous Article In Volume
Next Article In Volume>

Design and Strength Analysis of Bean Washing Machine Frames Using the Fea Method

Authors
Dede Kurtubi1, *, Dani Mardiyana1
1Mechanical Engineering Departement, Nusa Putra University, Sukabumi, Indonesia
*Corresponding author. Email: Dede.Kurtubi_tm16@nusaputra.ac.id
Corresponding Author
Dede Kurtubi
Available Online 13 May 2024.
DOI
10.2991/978-94-6463-406-8_17How to use a DOI?
Keywords
Finite Element Analysis; Frame Design; ASTM A36; Stress; Displacement; Safety factor
Abstract

Washing nuts is a crucial aspect in processing nuts to achieve the desired quality and cleanliness standards. Focusing on the nut washing machine as a key element is essential to achieve optimal production results. In developing this machine, the frame design is a key element, which must be able to withstand operational loads so that the machine can operate with stability and efficiency. The Finite Element Analysis (FEA) analysis method is used to understand and optimize machine frame design by breaking down the structure into small elements, evaluating stress distribution, deformation and structural response. From the results of the static analysis simulation, it was found that the nut washing machine frame using ASTM A36 material was able to withstand operational loads well. The maximum stress is 46.93 MPa, displacement is 0.143 mm, and safety factor is 5.33 ul, indicating adequate frame strength and durability. Thus, it can be concluded that the bean washer frame design meets the structural reliability criteria, providing confidence that the machine can operate safely and efficiently.

Copyright
© 2024 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Download article (PDF)

<Previous Article In Volume
Next Article In Volume>
Volume Title
Proceedings of the 2nd International Conference on Consumer Technology and Engineering Innovation (ICONTENTION 2023)
Series
Advances in Engineering Research
Publication Date
13 May 2024
ISBN
10.2991/978-94-6463-406-8_17
ISSN
2352-5401
DOI
10.2991/978-94-6463-406-8_17How to use a DOI?
Copyright
© 2024 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Cite this article

risenwbib
TY  - CONF
AU  - Dede Kurtubi
AU  - Dani Mardiyana
PY  - 2024
DA  - 2024/05/13
TI  - Design and Strength Analysis of Bean Washing Machine Frames Using the Fea Method
BT  - Proceedings of the 2nd International Conference on Consumer Technology and Engineering Innovation (ICONTENTION 2023)
PB  - Atlantis Press
SP  - 90
EP  - 97
SN  - 2352-5401
UR  - https://doi.org/10.2991/978-94-6463-406-8_17
DO  - 10.2991/978-94-6463-406-8_17
ID  - Kurtubi2024
ER  -