Design of Measure-control System for a New Type Intelligent Engine Intercooler

DOI

10.2991/icmse-17.2017.76How to use a DOI?

Keywords

Engine, Intercooler, Measurement technology, Control system

Abstract

In order to improve the engine power and reduce fuel consumption, the supercharger in the engine has been more and more widely used. Intercooler is widely used to obtain a higher in-cylinder charge density. With the introduction of the national sixth stage emission standards, higher requirements for the intercooler was put forward in the heavy engine engine test. Coolant temperature and coolant flow rate of the charge air cooler at the above set point shall not be changed for the whole test cycle. At present, most of the water-cooled intercoolers directly through the control of the cooling water flow or temperature to achieve the cold after the temperature control, these devices have not met the requirements of the test procedures in the national sixth stage emission standards. Therefore, it is important to develop an engine cooling device that meets the requirements of the national emission standard test.

Copyright

© 2017, the Authors. Published by Atlantis Press.

Open Access

This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

TY  - CONF
AU  - Hua Zhou
AU  - Xiaojun Jing
AU  - Zenghui Yin
PY  - 2017/04
DA  - 2017/04
TI  - Design of Measure-control System for a New Type Intelligent Engine Intercooler
BT  - Proceedings of the 2017 7th International Conference on Manufacturing Science and Engineering (ICMSE 2017)
PB  - Atlantis Press
SP  - 397
EP  - 400
SN  - 2352-5401
UR  - https://doi.org/10.2991/icmse-17.2017.76
DO  - 10.2991/icmse-17.2017.76
ID  - Zhou2017/04
ER  -