Influences of Material Parameters on Power Spinning Process of Large Ellipsoidal Heads with Variable Thicknesses
- DOI
- 10.2991/icmse-15.2015.200How to use a DOI?
- Keywords
- power spinning, LEHVT, material parameters, numerical simulation, ABAQUS
- Abstract
During the power spinning process of large ellipsoidal heads with variable thicknesses (LEHVT), material parameters of the blank have a significant effect on the quality of LEHVT and the determination of forming parameters. In this paper, the influences of hardening exponent, yield stress and elastic modulus on spinning force, degree of inhomogeneous deformation and unfitability degree are investigated by using 3D-FE numerical simulation under ABAQUS software environment. The results show that, spinning force increases with the increase of hardening exponent, yield stress and elastic modulus. Degree of inhomogeneous deformation increases with the decrease of hardening exponent and the increase of elastic modulus and yield stress. Unfitability degree increases with the decrease of elastic modulus and the increase of hardening exponent and yield stress. The achievements may provide not only an important reference and basis for selecting spinning equipment, but also a guide for quality and process control of the power spinning process of LEHVT.
- Copyright
- © 2015, the Authors. Published by Atlantis Press.
- Open Access
- This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).
Cite this article
TY - CONF AU - Jinhui Zhang AU - Mei Zhan AU - Zhongtai He AU - Guiling Chen AU - Guoan Liang AU - Guojun Fan PY - 2015/12 DA - 2015/12 TI - Influences of Material Parameters on Power Spinning Process of Large Ellipsoidal Heads with Variable Thicknesses BT - Proceedings of the 2015 6th International Conference on Manufacturing Science and Engineering PB - Atlantis Press SP - 1105 EP - 1110 SN - 2352-5401 UR - https://doi.org/10.2991/icmse-15.2015.200 DO - 10.2991/icmse-15.2015.200 ID - Zhang2015/12 ER -