Proceedings of the Second International Conference on Mechanics, Materials and Structural Engineering (ICMMSE 2017)

249 authors
Aigbavboa, Clinton
Review of the Application of Nanotechnology for Sustainable Construction Materials
Aigbavboa, Clinton
Effects of Automation on Construction Industry Performance
Ainur, Kabylzhan
Controlling the Parameters of Process of Drilling Wells Using Mathematical Modeling
Akinlabi, Esther T
Measurement of hardness and properties of copper alloy processed by friction stir process
Akinlabi, Esther T.
Modelling the influence of friction coefficient on materials process by Equal Channel Angular Press technique
Akinlabi, Stephen A.
Microstructural Evolution during Laser Processing of Titanium Alloy
Akinlabi, Esther T.
Microstructural Evolution during Laser Processing of Titanium Alloy
Akinlabi, Esther T.
Gas Flow Rate and Scanning Speed influence on microstructure and Microhardness Property of Laser Metal Deposited Titanium-alloy
Akinlabi, Esther T.
Influence of Powder Flow Rate on Properties of Laser Deposited Titanium Alloy -Ti6Al4V
Akinlabi, Esther
Effect of Water flow Rate on the Yield Strength of a Reinforced bar
Baek, Yong
Evaluation of Cavity Exploration Technology to deal with Ground Subsidence in Urban Area
Baex, Yong
Analysis of the characteristics in variation of groundwater level in consideration of geological property during excavation in urban area
Bodnarova, Lenka
Impact-Echo Method Used to Testing of High Temperature Degraded Concrete Composite of Portland Cement CEM I 42.5 R and Gravel Aggregate 8/16
Bonannini, Elisa
Seismic response of a stock of social housings in Italy with r.c. and masonry materials.
Bouassida, Wafi
Use of Recharge Impulse Technology in Deep Foundations Set-up
Bouassida, Mounir
Use of Recharge Impulse Technology in Deep Foundations Set-up
Brooks, Richard
The Performance of 2.5D Woven Polymeric Matrix Composites under Ballistic Impact Loadings
Bui, Gia Thinh
Research on the Measuring System of Polymer-based Capacitive Micromachined Ultrasonic Transducer Array for Circular Planar Target
Bushma, Oleksandr
Analysis of the Current State of the Processes of Hybrid Laser-Plasma Welding
Cen, Cheng-xian
Experimental Study on the Change of Mechanical Properties of Mechanism Sand Mortar Subjected to High Temperature
Cha, Jang-Hwan
Analysis of the characteristics in variation of groundwater level in consideration of geological property during excavation in urban area
Chang, Ta-Peng
Experimental Investigation of Fly Ash and Water Content on the Internal Friction of Concrete
Chen, Chiou-Chuan
Light-Weight Perlite Medium Cultivation of Plants used in Extensive Green Roof Feasibility Studies
Chen, Zhijun
Peridynamic Modeling of plain concrete structures under monotonic loading
Chen, Hong Mei
Advanced Shape Memory Technology for Comfort Fitting
Chen, Song
Study on Integrated Control of Active Anti-Roll Steel Bar and Electronic Stability Program Based on Particle Swarm Optimization
Chen, Song
Study on Vehicle Instability Control Based on Hydraulic coordinator of Electronic Stability Program and Anti-lock Brake System
Cheng, Xiang ping
Strain resistors method test the magnetostrictive property of FebacCu1Nb3Si15.5B7/Silicone rubber compound film
Cheng, Miaomeng
Comparison on modifications of vanadium oxide thin films by single-walled and multi-walled carbon nanotubes
Chiang, Yu-Hsuan
Research on the Measuring System of Polymer-based Capacitive Micromachined Ultrasonic Transducer Array for Circular Planar Target
Chobolacc, Zdenek
Impact-Echo Method Used to Testing of High Temperature Degraded Concrete Composite of Portland Cement CEM I 42.5 R and Gravel Aggregate 8/16
Cinotti, Marco
Seismic response of a stock of social housings in Italy with r.c. and masonry materials.
Cretu, Marian
Improving Sports Technique of Key Elements in Dismounts on Uneven Bars Based Biomechanical Indicators
De, Wang
Strain resistors method test the magnetostrictive property of FebacCu1Nb3Si15.5B7/Silicone rubber compound film
Defalco, Marcello
Phase Change Material as Energy Material for Cold Storage and its integration in Civil Air Conditioning Systems: material properties and on field application
Deng, Ming
Fatigue analysis of cracks at the rib-to-deck welded joint of orthotropic steel deck accounting for the influence of compressive stress in cyclic loading
Dong, Chunli
Analysis of the Current State of the Processes of Hybrid Laser-Plasma Welding
Dong, Qi
Comparison of Two Procedures in Application of Numerical Simulation of Shallow Water Explosion in Multi-material Media
Du, Xiaoqiong
A New Family of Explicit Time Integration Algorithms with Controllable Accuracy for Structural Dynamics
Du, Qing
Fatigue analysis of cracks at the rib-to-deck welded joint of orthotropic steel deck accounting for the influence of compressive stress in cyclic loading
Dvorak, Richard
Impact-Echo Method Used to Testing of High Temperature Degraded Concrete Composite of Portland Cement CEM I 42.5 R and Gravel Aggregate 8/16
Ehrmann, A.
Needleless electrospinning of PEO nanofiber mats
Elena, Sitnikova
The Performance of 2.5D Woven Polymeric Matrix Composites under Ballistic Impact Loadings
Feng, Guang
Reliability evaluation of distribution network with distributed generation
Fu, Pengfei
Formation Mechanisms of Electron Beam Processed Surface Textures on Titanium Alloys
Fuwen, Hu
Vision modeling optimization of freely placed and moving objects
Gong, Jinghai
Optimization of Porous Concrete containing Admixtures on Lighten Road
Gong, Jie
Fatigue Crack Growth Life Prediction of Screw Blade in Screw Sand Washing Machine based on Austen Growth Law
Großerhode, C.
Needleless electrospinning of PEO nanofiber mats
Grothe, T.
Needleless electrospinning of PEO nanofiber mats
Gu, Yu
Comparison on modifications of vanadium oxide thin films by single-walled and multi-walled carbon nanotubes
Guangxiu, Fang
The Technology of Deepening Construction and Temperature Crack Control of Mass Concrete
Gullazata, Dairbayeva
Controlling the Parameters of Process of Drilling Wells Using Mathematical Modeling
Hamdi, Essaieb
Use of Recharge Impulse Technology in Deep Foundations Set-up
Hamiyanze, Moonga Kando
Numerical Analysis of the Cold Gas Dynamic Spray Surface Coating Process
Han, Fei
Reliability evaluation of distribution network with distributed generation
Hao, Yuhang
Study on Application of the Autoclaved Sand-Lime Brick in Masonry Structure of villages and towns
Hara, Yusuke
Activation energy of the soluble-insoluble self-oscillation in an autonomous polymer chain
Hara, Yusuke
Effect of strong acid on the self-oscillating behavior for the polymer chain with the Fe(bpy)
Hauser, T.
Needleless electrospinning of PEO nanofiber mats
He, Qiong
Comparison on modifications of vanadium oxide thin films by single-walled and multi-walled carbon nanotubes
He, Cunfu
Study on the flexible Rayleigh waves comb transducer with non-equidistant interval based on PZT
He, Jiangshan
Study on Application of the Autoclaved Sand-Lime Brick in Masonry Structure of villages and towns
He, Dean
Advances of Magnetic Memory Testing Technology
He, Dean
Study on Magnetic Memory Testing Signal Characteristics of Pipeline Defects Based on Wavelet Packet Analysis
He, Dean
The Study of the Magnetic Memory's Magneto-Mechanical Coupled Effect Based on ANSYS
Hela, Rudolf
Impact-Echo Method Used to Testing of High Temperature Degraded Concrete Composite of Portland Cement CEM I 42.5 R and Gravel Aggregate 8/16
Heng, Lida
Design and Analysis of Pressure Vessel According to Internal Design Pressure and Temperature Using FEM
Hongbin, Jia
The Technology of Deepening Construction and Temperature Crack Control of Mass Concrete
Hou, Huipeng
Effects of Hot Isostatic Pressing on Microstructure and Mechanical Properties of Hastelloy X Samples Produced by Selective Laser Melting
Huang, Wenjuan
Optimization of Porous Concrete containing Admixtures on Lighten Road
Huang, Wen-Ling
Viscoelastic Analysis of Flexible Pavements Embedded with Controlled Low-Strength Material Bases Using Finite Element Method
Huang, Li-Jeng
Viscoelastic Analysis of Flexible Pavements Embedded with Controlled Low-Strength Material Bases Using Finite Element Method
Huang, Li-jeng
Finite Element Analysis of Cracked Flexible Pavements Embedded with Controlled Low-Strength Material Bases
Huang, Wei Min
Advanced Shape Memory Technology for Comfort Fitting
Huang, Feng-Yun
Vibration Characteristic Analysis of the Cross-type Joint and Rzeppa Joint of the SS400 Transmission Shaft on Micro-vehicle
Huo, Ningfei
Fatigue analysis of cracks at the rib-to-deck welded joint of orthotropic steel deck accounting for the influence of compressive stress in cyclic loading
Igor, Garkin
Construction survey objects agro industrial complex with system approach
Igor, Garkin
Crane Runway Beams: Endurance Test
Irina, Garkina
Construction survey objects agro industrial complex with system approach
Ivan A., Potokhin
Equal Strength and Equal Stress Structures. Models and Reality
Jang, Ho-Myun
A study on the wind-induced vibration response material characteristics of typical and atypical high-rise buildings according to changes in corner shapes material
Jen, Tien-Chen
Numerical Analysis of the Cold Gas Dynamic Spray Surface Coating Process
Jen, Tien-Chien
Effect of Water flow Rate on the Yield Strength of a Reinforced bar
Jiang, Yadong
Comparison on modifications of vanadium oxide thin films by single-walled and multi-walled carbon nanotubes
Jiang, Zexin
Investigation on the characterization and properties of EH36 steel FCB welded joint
Jiang, Ming
Advances of Magnetic Memory Testing Technology
Jiang, Ming
Study on Magnetic Memory Testing Signal Characteristics of Pipeline Defects Based on Wavelet Packet Analysis
Jiang, Ming
The Study of the Magnetic Memory's Magneto-Mechanical Coupled Effect Based on ANSYS
Kern, P.
Needleless electrospinning of PEO nanofiber mats
Khantachawana, Anak
Effect of experimental design parameters on mechanical properties of braided stentriever made from shape memory alloy
Kharine, Youri
Use of Recharge Impulse Technology in Deep Foundations Set-up
Khaskin, Vladyslav
Analysis of the Current State of the Processes of Hybrid Laser-Plasma Welding
Kim, Dong-Min
Evaluation of Cavity Exploration Technology to deal with Ground Subsidence in Urban Area
Kim, Woo-Seok
Evaluation of Cavity Exploration Technology to deal with Ground Subsidence in Urban Area
Kim, Woo-Seok
Analysis of the characteristics in variation of groundwater level in consideration of geological property during excavation in urban area
Kim, Min Soo
Design and Analysis of Pressure Vessel According to Internal Design Pressure and Temperature Using FEM
Kirill, Nezdanov
Crane Runway Beams: Endurance Test
Kong, Weiyi
The Performance of 2.5D Woven Polymeric Matrix Composites under Ballistic Impact Loadings
Kong, Weiyi
Testing and Representation of Strain Rate Sensitive Mechanical Properties of Epoxy Resin